Manual Multiplex EasyStar II - 21 4260 (page 12 of 56) (English, German, French, Italian, Spanish)

561584

Zoom out

Zoom in

1/56

Examine your kit carefully!

MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you

are satisfied with the contents of your kit. However, we would ask you to check all the parts before you start construction, referring

to the Parts List, as we cannot exchange components which you have already modified. If you find any part is not acceptable

for any reason, we will readily correct or exchange it once we have examined it. Just send the component to our Model Department,

with adequate pre-paid carriage, and be sure to include the completed complaints form. We are constantly working on improving

our models, and for this reason we must reserve the right to alter the kit contents in terms of shape or dimensions of parts,

technology, materials and fittings, without prior notification. Please understand that we cannot entertain claims against us if the

kit contents do not agree in every respect with the instructions and the illustrations.

Caution!

Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the word.

Building and operating them safely requires a certain level of technical competence and manual skill, together with

discipline and a responsible attitude at the flying field.

Errors and negligence in building and flying the model can result in serious personal injury and damage to property. Since

we, as manufacturers, have no control over the construction, maintenance and operation of our products, we are obliged

to take this opportunity to point out these hazards and to emphasize your personal responsibility.

Airborne radio control system components

Recommended equipment:

Min. MULTIPLEX RX-5 light M-LINK receiver, Order No. 5 5808

or RX-6-DR light M-LINK, Order No. 5 5809

Two Nano-S servos (rudder + elevator), Order No. 6 5120

Optional: two additional Nano-S servos, Order No. 6 5120

(for ailerons)

Two 30 cm servo extension leads, Order No. 8 5031

Power set:

“EASYStar II” power set, Order No. 33 2622

containing brushless motor, speed controller, folding propeller, driver, spinner and accessories.

Power set:

“EASYStar II” power set, Li-BATT powered, Order No. 33 3622

Brushless motor, speed controller, folding propeller, driver, spinner and accessories, Li-BATT ECO flight pack, 3/2000

(M6)

Recommended battery:

Li-BATT ECO 3/1-2000 (M6), Order No. 15 7231

Adhesive: Zacki ELAPOR ® 20 g, Order No. 59 2727

Zacki ELAPOR ® Super liquid 10 g, Order No. 59 2728

Battery charger:

MULTIcharger LN-3008 EQU with 230 V / 12 V AC/DC mains PSU, 5.0 A, Order No. 9 2545

Tools:

Scissors, balsa knife, combination pliers, 4 - 5 mm Ø bradawl or small round file.

Important note

This model is not made of Styrofoam™, and it is not possible to glue the material using white glue, polyurethane or epoxy

adhesives.

These glues only produce a superficial bond which fails immediately when stressed. Please be sure to use medium-viscosity

cyano-acrylate glue exclusively - ideally our Zacki -ELAPOR® # 59 2727, the super-glue designed and optimized expressly for

ELAPOR® particle foam. If you use Zacki-ELAPOR®, you usually do not need cyano activator (kicker). However, if you prefer to

use a different cyano, and therefore have to use activator, always use the spray in the open air to avoid the unpleasant fumes.

Please take care when handling cyano-acrylate adhesives; these materials harden in seconds, so avoid getting them on your

fingers or other parts of the body. We strongly recommend the use of goggles to protect your eyes. Keep the adhesive out of the

reach of children.

Order No. 21 4260

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex EasyStar II - 21 4260 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex EasyStar II - 21 4260 Manual

Product: