561581
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
Part No. Description Material Dimensions
No. off
11 1 R.H. aileron Moulded Elapor foam Ready made
12 1 Tailplane Moulded Elapor foam Ready made
13 1 L.H. elevator Moulded Elapor foam Ready made
14 1 R.H. elevator Moulded Elapor foam Ready made
15 1 Fin Moulded Elapor foam Ready made
16 1 Rudder Moulded Elapor foam Ready made
17 1 L.H. inner wheel spat Moulded EPP foam Ready made
18 1 R.H. inner wheel spat Moulded EPP foam Ready made
19 1 L.H. outer wheel spat Moulded EPP foam Ready made
20 1 R.H. outer wheel spat Moulded EPP foam Ready made
21 1 Spinner Moulded EPP foam Ready made, approx. 62 Ø
22 1 Wing jig strip Pre-cut EPS foam 10 x 30 x 460 mm
Small items set
30 3 Hook-and-loop tape, hook Plastic 25 x 60 mm
31 3 Hook-and-loop tape, loop Plastic 25 x 60 mm
32 2 Canopy-Lock latch clip Inj. moulded plastic Ready made
33 2 Canopy-Lock latch tongue Inj. moulded plastic Ready made
34 2 Acro glue-fitting horn (ailerons) Inj. moulded plastic Ready made
35 4 Pushrod connector Metal Ready made, 6 mm Ø
36 4 Washer Metal M2
37 4 Nut Metal M2
38 4 Socket-head grubscrew Metal M3 x 3 mm
39 1 Allen key Metal 1.5 mm A/F
40 2 Clevis Inj. moulded plastic Ready made
41 2 Pre-formed aileron pushrod Metal M2 x 200 mm
42 3 x 6 Film hinge (sprues of 6) Inj. moulded plastic Ready made
43 2 Servo output arm extension Inj. moulded plastic Ready made
44 1 Glue-fitting horn, rudder / tailskid Inj. moulded plastic Ready made
45 1 Glue-fitting tailwheel bush Inj. moulded plastic Ready made
46 1 Elevator joiner A (with horn) Inj. moulded plastic Ready made
47 1 Elevator joiner B Inj. moulded plastic Ready made
48 1 Spinner holder Inj. moulded plastic Ready made
49 2 Servo output arm extension screw Metal
Wire set
50 1 Front tubular spar GRP tube 10 Ø x 7.4 x 200 mm
51 1 Rear tubular spar CFRP tube 10 Ø x 7.4 x 620 mm
52 1 Pre-formed rudder pushrod Metal 0.8 Ø x 580 mm
53 1 Pre-formed elevator pushrod Metal 0.8 Ø x 510 mm
54 1 Snake outer sleeve, rudder Plastic (480 mm*) 3 Ø x 2 x 480 mm
55 1 Snake outer sleeve, elevator Plastic (480 mm*) 3 Ø x 2 x 400 mm
56 1 Snake inner tube, rudder Plastic (500 mm*) 2 Ø x 1 x 500 mm
57 1 Snake inner tube, elevator Plastic (500 mm*) 2 Ø x 1 x 420 mm
AcroMaster motor mount incl. screws
60 2 Motor mount Inj. moulded plastic Ready made
61 1 Motor bulkhead Inj. moulded plastic Ready made
62 1 Motor mount brace Inj. moulded plastic Ready made
63 1 Spacer ring Inj. moulded plastic Ready made
64 4 Motor bulkhead adjustor screw Metal M3 x 8 mm
65 4 Motor bulkhead mounting screw Metal M3 x 16 mm
Undercarriage set
70 1 Main undercarriage unit Metal 2.5 Ø, ready made
71 2 Lightweight wheel Moulded EPP foam 53 Ø, hub bore 2.5 mm
72 4 Collet Metal 2.7 Ø x 7 x 5 mm
73 2 Socket-head grubscrew Metal M3 x 3 mm
74 2 Socket-head grubscrew Metal M3 x 5 mm
75 2 Wheel spat bracket Inj. moulded plastic Ready made
76 1 Undercarriage mount Plastic Ready made
77 1 Tailwheel wire Metal 1.3 mm Ø
78 1 Lightweight tailwheel Plastic 26 Ø, hub bore 1.5 mm
79 2 Tailwheel retainer (tubular rivet) Metal 2 Ø x 0.2 x 3 mm
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Acromaster 21 4215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Acromaster 21 4215 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info