561581
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we hope that you
are satisfied with the contents of your kit. However, we would ask you to check all the parts before you start
construction (using the Parts List as a guide), as we cannot exchange components which you have already
worked on. If you find a part is not acceptable for any reason, please take it back to your supplier (model shop), as he
is your first port of call. After checking, he will send the part or the kit to our Quality Control department. Please be sure
to include the purchase receipt and a brief description of the fault, otherwise we cannot process your complaint.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please
understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the
instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating
them safely requires a certain level of technical competence and manual skill, together with discipline and a
responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in
serious personal injury and damage to property. Since we, as manufacturers, have no control over the
construction, maintenance and operation of our products, we are obliged to take this opportunity to point out
these hazards and to emphasise your personal responsibility.
Additional items required:
e.g. MULTIPLEX Micro IPD receiver 35 MHz A-band Order No. 5 5971
alternatively: 40 MHz Order No. 5 5972
MULTIPLEX RX-7 Synth DS IPD receiver 35 MHz A-band Order No. 5 5885
MULTIPLEX Nano S servo (2 required for ailerons) Order No. 6 5120
Tiny-S (2 required for rudder and elevator) Order No. 6 5121
Servo extension lead (2 required for aileron servos) Order No. 8 5031
”AcroMaster” power set, HiMax HC 3516-1130 Order No. 33 2631
Contents: 1 HC 3516-1130 motor
1 11 x 5.5” APC propeller
1 5 mm Ø collet propeller driver
1 speed controller, e.g. Castle Creations Phoenix 45A
Flight battery:
MULTIPLEX flight battery, e.g. LiBATT 2100 mAh - 3200 mAh, 3 cells (maximum load approx. 40 A)
Adhesive: cyano-acrylate
Use any type of medium or thick cyano-acrylate adhesive (”cyano”, ”CA”). Do not use styrofoam cyano. Epoxy
adhesives produce what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks
away from the parts under load. White glue is entirely unsuitable. However, hot-melt adhesive from a glue gun (”HM”) is
a very useful alternative - especially for mounting servos.
Tools:
Scissors, balsa knife, combination pliers, long-nose pliers, cross-point / slot-head screwdrivers (for servo output arms).
Specification:
Wingspan 1095 mm
Overall fuselage length 1150 mm
All-up weight min. 920 g
Wing area 36.6 dm²
Wing loading (FAI) min. 25 g / dm²
RC functions Aileron, elevator, rudder and throttle
Note: please remove the illustration pages from the centre of the instructions.
# 21 4215
GB
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Acromaster 21 4215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Acromaster 21 4215 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info