683937
4
Zoom out
Zoom in
Previous page
1/4
Next page
BA LS30knx Anwendungsprogramm HM; DE,GB - 23346 - ED – V01
* Functions available in ETS application program LS 30.00 knx Version 4.0, only in combination with hardware manufactured in CW16/2017 or later.
INSTRUCTION MANUAL ENGLISH – PAGE 2 /
2
Parameters
Parameter time switch standard
You have the possibility to activate 2 switching times (functionality like a time
switch with daily program) with a defined switching duration. Depending on the
start time and duration a switch-bit with the value “1” for ON respectively the
value “0” for OFF will be sent to the bus.
Adjustments / Description
Values
Time switch
Inactive/active
2nd switching time
Inactive/active
1
st
switching time: Switch on from [hour], [minute]
00:00 23:59
1
st
switching time: Switch on to [hour], [minute]
00:00 23:59
2
nd
switching time: Switch on from [hour], [minute]
00:00 23:59
2
nd
switching time: Switch on to [hour], [minute]
00:00 23:59
Parameters
Parameter light control
You have the possibility to send the lux value to the bus and/or to activate a light
control: lux switching (functionality like a twilight switch). Depending on your
parameter settings (Lux threshold / -hysteresis / -delay) the light control works
like a twilight switch and sends a switching bit or a scene to the bus when
reaching the lux thresholds. Additionally you have the option to activate an Extra
time switch. With this function you can program further switching times (OFF /
ON) with an adjustable duration (e.g. for energy saving solutions).
LUX LOGIC:
LUX THRESHOLD: Set the thresholds for the lux switching (ON / OFF).
FURTHER LUX THRESHOLD: You can set a further lux threshold.
LUX DELAY ON or OFF: It is possible to set a delay to avoid undesirable
switching due to disturbing light sources, e.g., car lights.
LUX HYSTERESIS: It is possible to set a hysteresis to avoid undesirable
switching due to disadvantageous positioning of the sensor, e.g., close to a
yard light.
Adjustments / Description
Values
Send measurement value
never, on query, on query and automatic/cyclic, on query
and change, on query and change and automatic/cyclic
Cycle interval for measurement value
every 30 seconds, every minute, every hour, every 6
hours, every 12 hours, at 00:00 am, at 00:02 am
Send upon x[%] change of measured value
1 50
Lux switching
Inactive/active
Light control depending on internal measurement or external bus value
Measurement value (intern), Bus (extern)**
Lux logic
ON at darkness / OFF at brightness,
OFF at darkness / ON at brightness
Threshold 2
Inactive/active
Extra time switch
Inactive/active
Settings for threshold 1 / treshold 2:
Threshold in [lux]
1 220.000 Lux
Hysteresis in [%]
0 50
Delay darkness in [s]
0 3600
Delay brightness in [s]
0 3600
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 64
Scene number for switching off
1 64
* Enable blocking object
No/Yes
* Behaviour of blocking object
Block on 1 / Block on 0
* Condition after reset
Released / Blocked
* Behaviour when released
No action / Send current value
* Behaviour when blocked
No action / Send telegram
* Telegram when blocked
0/1 or scene number 1-64
Switch OFF
Inactive/active
Switch off from [hour], [minute]
00:00 23:59
Switch off to [hour], [minute]
00:00 23:59
Switch ON
Inactive/active
Switch on from [hour], [minute]
00:00 23:59
Switch on to [hour], [minute]
00:00 23:59
Parameters
Parameter temperature control
You have the possibility to send the temperature values to the bus and/or to
activate a temperature control (by activating the temperature threshold).
Depending on your parameter settings (Temperature setpoint + Delay
temperature setpoint + Temperature hysteresis) the temperature control sends a
switching bit or a scene to the bus when reaching the temperature thresholds.
TEMPERATUR LOGIC:
Adjustments / Description
Values
Send measurement value
never, on query, on query and automatic/cyclic, on query
and change, on query and change and automatic/cyclic
Cycle interval for measurement value
every 30 seconds, every minute, every hour, every 6
hours, every 12 hours, at 00:00 am, at 00:02 am
Send upon x*[0.C] change of measured value
1 255
Temperature threshold
Inactive/active
Temperature control depending on internal measurement or external bus
value
Measurement value (internal), Bus (external)**
Temperature setpoint in [0.1°C]
-500…+1000
Temperature hysteresis in [0.1°C]
1 600
Delay temperature setpoint in [s]
0 3600
Temperature logic
T > setpoint (cooling), T < setpoint (heating)
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 64
Scene number for switching off
1 64
* Enable blocking object
No/Yes
* Behaviour of blocking object
Block on 1 / Block on 0
* Condition after reset
Released / Blocked
* Behaviour when released
No action / Send current value
* Behaviour when blocked
No action / Send telegram
* Telegram when blocked
0/1 or scene number 1-64
* Functions available in ETS application program LS 30.00 knx Version 4.0, only in combination with hardware manufactured in CW16/2017 or later.
** Definition „Receiver (internal) / Measurement value (internal)“: If „Receiver (internal)“ or „Measurement value (internal)“ is selected
the measurements provided by the LS30.00knx will be used and will also be send to the bus!
Definition „Bus (external)“: If „Bus (external)“ is selected the values provided from the bus will be used but still the measured
values of the LS30.00knx will be send to the bus!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Muller LS 30.00 knx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Muller LS 30.00 knx in the language / languages: English, German as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Muller LS 30.00 knx

Muller LS 30.00 knx User Manual - English, German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info