683946
30
Zoom out
Zoom in
Previous page
1/59
Next page
TECHNICAL MANUAL GS 4x.10 KNX ENGLISH
30
8. Temperature control
8.1 Temperature control – heating and cooling
Designation
Options
Description
Select heating and/or
cooling
Disabled
Heating
Cooling
Heating and cooling
Temperature controller disabled.
Operating mode: Heating only.
Operating mode: Cooling only.
Operating mode: Heating and cooling.
Extra level heating /
Extra level cooling
Disabled
Enabled
Extra level heating / cooling disabled.
In addition to the main level (e.g. underfloor heating) an extra level (e.g. electric heating) can be helpful for lazy
systems. It can shorten the slow heat-up phase of an underfloor heating. You can choose between a PI or two-
stage controller for the additional object.
Guide heating /
Guide cooling
Disabled
Enabled
Guide heating / cooling disabled.
With the parameter guiding it is possible to adjust the set point linearly depending on any reference
variable which is captured through an external sensor. In general, an outdoor temperature reset control is
realized. With an appropriate parameterization, the constant raising or lowering of the set value is
possible. The parameterization is carried-out together with the definition of the set points.
PI control: A PI control is a constant control that comprises a
proportional part (P-part) and an integral share (I-share). The size of the
P-part is indicated in Kelvin, the I-share in minutes. At a constant PI
control, the manipulated variables are operated in proportional steps up
to a maximum value.
2-stage-control: A two-stage control only sends two conditions for the
manipulated variable, on and off. The control turns on when falling
below a desired temperature and turns off when exceeding it. Set point
and switching hysteresis are defined in advance.
Main level and Extra level: In addition to the main level (e.g.
underfloor heating) an extra level (e.g. electric heating) can be helpful
for slow systems controlled by main level. This can shorten in the
mentioned example the slow heat-up phase of an underfloor heating.
You can choose between a PI or two-stage controller for the additional
object.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Muller GS 40.10 knx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Muller GS 40.10 knx in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Muller GS 40.10 knx

Muller GS 40.10 knx User Manual - English - 2 pages

Muller GS 40.10 knx Installation Guide - German - 59 pages

Muller GS 40.10 knx User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info