629100

MTD Zero Turn Serie RZT-S Manual

10
Zoom out
Zoom in
Previous page
1/18
Next page
Operating Manual English
7
Installing the seat
Fig. 2d
Note
When attaching the seat, do not
damage the seat switch cable!
Push excess cable back into the
opening of the seat support.
Mount discharge flap on the
mower deck
Fig. 2e
Remove nuts (1) from the carrier
pins (2).
Mount discharge flap (3) on the
carrier pins (2) and attach with
the nuts (1).
Controls and indicators
Warning. Damage to the unit.
First of all the functions of the
controls and indicators are
described here. Do not execute
any functions yet!
Fig. 1
1 Forward pedal
2 Reverse pedal
3 Pedal for parking brake/
cruise control
4 Cutting height adjustment lever
5 Throttle/Choke *
6 Combination indicator *
7 Choke *
8 PTO switch
9 Can holder
10 Ignition lock *
11 Storage bin
12 Gear release lever
13 Fuel tank
14 Seat adjustment lever *
15 Steering wheel
16 Brake pedal
(* depending on model)
Forward pedal (1)
Fig. 8
The pedal controls the speed
in a forward direction.
Reverse pedal (2)
Fig. 8
The pedal controls the speed
in a reverse direction.
Information on forward/reverse
pedal
To stop or change direction of
travel, release the appropriate
pedal.
Parking brake/
Speed control (3)
Fig. 8
This pedal has a dual function:
Actuate the parking brake .
Depress brake pedal (16) all the
way and press pedal.
Release the parking brake.
Depress brake pedal (16) all the
way, pedal is released.
Switching on Tempomat :
When driving, press the pedal.
The forward speed selected at this
point (but not top speed) is main-
tained, and the drive pedal can be
released.
When the forwards accelerator
pedal or brake pedal is depressed,
the cruise control is automatically
switched off.
Cutting height adjustment
lever (4)
Fig. 1
Largest cutting height, cutters top =
lever to “H/8”.
Smallest cutting height, cutters
bottom = lever to “L/1”.
Note
Smallest cutting height ~3,8 cm.
Largest cutting height ~10 cm.
Choke (7/5, depending on
model)
Fig. 5
To start a cold engine, pull out the
choke (fig. 5a) or set the throttle to
position (fig. 5b).
Throttle (5)
Fig. 4
Set engine speed steplessly.
Fast engine speed = .
Slow engine speed = .
Combination indicator (6)
(optional)
Fig. 7
According to the model, the
combination indicator can consist
of the following elements.
Oil pressure (1):
The indicator light is lit while the
engine is running, immediately
switch off engine and check oil
level. Where necessary, visit
a garage.
Brake (2):
Indicator lamp lights up if the brake
pedal is not depressed or the
parking brake is not locked when
the engine starts.
Cutter deck (PTO) (3):
The indicator lamp lights up when
the cutters are not switched OFF
at engine start (PTO).
Battery charge indicator (4):
If the indicator light lights up when
the engine is running, this means
that the battery is not sufficiently
charged. Where necessary, visit
a garage.
Operating hour counter (5):
Indicates the operating hours in
hours and
1
/
10
hours on the display.
Ampere meter (6):
This shows the charging current
from the generator to the battery.
Optional functions
(depending on model)
Fig. 7a: Type 1
Fig. 7b: Type 2
Operating hour counter
(type 1, type 2):
When the ignition is switched on,
the battery voltage indicator is
indicated for a short period and
then the operating hours are
indicated. The operating hours are
always counted except for when
the ignition key is in the „Stop“
position or when it is removed.
Oil change display (Type 1):
Each time 50 operating hours have
elapsed (according to the model),
the oil change indicator „CHG/OIL“
appears in the display for five
minutes. This message appears
after the next two hours of
operation. See the engine manual
for oil change intervals.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD Zero Turn Serie RZT-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD Zero Turn Serie RZT-S in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD Zero Turn Serie RZT-S

MTD Zero Turn Serie RZT-S User Manual - German - 18 pages

MTD Zero Turn Serie RZT-S User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info