507836
8
Zoom out
Zoom in
Previous page
1/18
Next page
Operating instructions for lawn tractors English
5
Make sure that at all times there
are no persons, especially children,
or animals in the working area.
Check the area in which you intend
to use the unit and remove all objects
that could be hit and propelled by the
unit. You can thus avoid injuries and
damage to the unit.
Never mow on slopes that are steeper
than 20%. Working on slopes is
dangerous; the risk of rollover and
sliding is increased.
When working on slopes, always drive
off and halt the unit gently and
gradually. The transmission should
always be engaged when driving
down a slope – never coast – and
drive at a low speed.
Never drive across the face of a slope,
always up and down the slope.
Only use the unit in daylight or with
a sufficient level of artificial lighting.
The unit is not authorised for the
transport of people.
Never allow passengers on the unit.
Before any work
on the appliance
Protect yourself from injury.
Before doing any work to this
appliance:
turn the engine off,
remove the ignition key,
lock the parking brake,
wait until all moving parts have
come to rest and the engine has
fully cooled,
pull off the cap of the spark plug
so that the engine cannot inad-
vertently start.
After working with
the appliance
Only leave the appliance once you
have turned off the engine, actuated
the parking brake and have removed
the ignition key.
Safety features
Safety features serve to protect you
and must always be functional.
You may not make any alterations
to the safety features or circumvent
their proper functioning.
Safety features are:
Grass flap
Fig. 14
The grass flap protects you against
possible injuries resulting from
the cutting blade or objects that
are propelled by it.
The unit may only be operated with
the grass flap attached.
Safety lock system
The safety interlock system will not
allow the engine to start unless
the driver is sitting on the seat,
the brake pedal has been
depressed or the parking brake
is in the park position,
the accelerator pedal is on “N”,
i.e. is not actuated,
the cutter deck/accessories
are switched off, i.e.: PTO switch
or PTO lever in “Off” position
(PTO = Power-Take-Off).
The safety interlock system auto-
matically switches the engine off as
soon as the operator leaves the seat
without actuating the parking brake
beforehand.
The safety interlock system auto-
matically switches the cutter deck/
accessories (PTO) off as soon as the
operator leaves the seat, irrespective
of whether the parking brake was
actuated beforehand.
The safety interlock system auto-
matically switches the cutter
deck/accessories (PTO) off as soon
as the reverse pedal is actuated
(if the OCR function has not been
activated).
To switch the cutter deck/accesso-
ries on again, first switch the PTO
switch off and then switch on again.
Symbols on the appliance
Various symbols are stuck to the
appliance in the form of adhesive
labels. The following provides
an explanation of the symbols.
Warning!
Please read the ope-
rating instructions
before putting lawn-
mower into operation!
Keep third parties
away from the danger
area!
Risk of injury from
rotating blades and
other rotating parts.
Always remove
the spark plug con-
nector before working
on the cutters!
Keep fingers and feet
well away from the
cutters! Always switch
off the appliance and
remove the spark plug
connector before
adjusting, cleaning
or checking it.
Risk of injury from
propelled grass
or solid objects that
are propelled.
There must be no per-
sons, especially chil-
dren, or animals in the
area of operation.
Working on steep
slopes increases
danger.
Warning!
Risk of explosion.
Battery acid/risk
of chemical burns.
Beware of hot surface!
Withdraw the key from
the ignition before all
work on the unit and
observe the instruc-
tions in this document.
!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD CubCadet serie 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD CubCadet serie 2000 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD CubCadet serie 2000

MTD CubCadet serie 2000 User Manual - German - 19 pages

MTD CubCadet serie 2000 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info