672422
10
Zoom out
Zoom in
Previous page
1/16
Next page
Operating manual English
7
Do not fill up with fuel
of specification E85!
Ejected objects and
rotating parts may
cause serious injuries!
Risk of injury from
rotating parts!
Keep hands and feet
away from rotating
parts.
Beware of hot sur
-
faces!
Keep fire away from
the fuel tank!
Petrol/Oil!
Always use clean and
fresh lead-free petrol
for mixing petrol.
Use only authorised
oil according to the
operating manual
for mixing petrol.
Maximum rpm.
Do not let the unit
run more quickly than
the maximum rpm.
Ignition switch
On /run/start
Ignition switch
Off/stop
Choke settings
Choke position
Operating position
Ensure that these symbols on the
unit are always in a legible state.
Replace damaged or illegible
symbols.
Symbols used in this manual
The following symbols are used
in this manual:
Danger
They refer to dangers which are
connected with the described
activity and which may result
in injury.
Caution
They refer to dangers which are
connected with the described
activity and which may result
in damage to property.
Note
Indicates important information and
application tips.
Operating and display
elements
Caution.
Damage to the appliance
This first describes the control and
display elements. Do not execute
any of the functions yet!
Fig. 1
1 Exhaust cover
2Spark plug
3 Starter handle
4 Tank cap
5 Intake pump/primer
6 Choke lever
7 Air filter cover
8 Hand grip
9 Upper drive shaft
10 Shaft coupling
11 Lower drive shaft
12 Cutting attachment cover
13 Line cutting blade
14 Line spool
15 Gearbox
16 Shoulder belt holder
17 Throttle lock
18 Throttle
19 Ignition switch
20 Throttle grip
21 Cutting blade with cutting
attachment cover *
22 Retaining bar *
23 Socket wrench *
* depending on model
Installation manual
Danger
Risk of injury from engine being
started unintentionally.
Protect yourself from injury.
Before working on the engine:
Switch off the engine.
Wait until all moving parts have
come to standstill; the engine
must have cooled down.
Remove spark-plug terminal.
Disposal instructions
Dispose of packaging remnants,
old units, etc., in accordance with
local regulations.
Installing and adjusting
the hand grip
Fig. 2a
Remove hand grip. To do this,
loosen the 4 screws.
Fit the anti-vibration rubber pad
on the shaft.
Place the hand grip from above
onto the anti-vibration pad.
Align the holes of the lower
retention plate with the screws in
the hand grip. Screw in the 4
screws. Do not tighten yet! Hold
the unit in the operating position
(Fig. 12) and move the hand grip
into the position which offers you
the best grip.
Tighten the 4 screws until the
hand grip is secure.
Installing/removing the lower
drive shaft
Fig. 2b
Installation
Remove protective cap (optional)
from the shaft coupling and lower
drive shaft.
Turn screw handle (1) on the shaft
coupling (2) anti-clockwise
to open the shaft coupling.
Press release button (3)
on the lower drive shaft and push
the shaft into the shaft coupling
until the release button engages
in the retaining hole (4).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD BC52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD BC52 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD BC52

MTD BC52 User Manual - German - 18 pages

MTD BC52 User Manual - Dutch - 17 pages

MTD BC52 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info