26
Delete the entire Calls list
1. Press Down to open the Calls list.
2. Press and hold Phonebook. The display shows « DELETE ALL ? ».
3. Press Menu to confirm or Phonebook to cancel.
9. Using additional handsets
Up to ve handsets can be registered to the base to extend the phone system
without having to install extension sockets for each new phone.
Each handset can be registered with up to four bases. The preferred base can then
be selected.
9.1 Registering an additional handset
Note: Handset batteries must be fully charged before registration. Hold the handset
close to the base during the registration process.
Handsets that were supplied with the base are already pre-registered.
On the base:
1. Press and hold Page for 3 seconds until two beeps are heard. The base will
remain in registration mode for 90 seconds.
On the handset:
1. Press Menu, scroll Down to « REGISTER » and press Menu.
2. Scroll Down to « REG BASE » and press Menu.
3. Enter the base number (1 - 4). The base numbers that are already in use flashes.
4. The display shows « SEARCHING... X », where « X » indicates the base
identification number.
5. The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default
= 0000) and press Menu.
A beep will be heard if the registration is successful. The handset is automatically
assigned an available handset number. Use this number when making internal
calls.
Notes: If registration is not successful the first time, please repeat the process again
in case the base registration period ran out of time. If the base is not found after a few
seconds, the handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the registration will fail. De-
register another handset before registering a new one.
9.2 Select a base
If the handset is registered to more than one base (e.g. one at work and one at
home), the preferred base can be selected.
Each handset can be registered with up to four bases.
