30
6. After the long beep speak the message slowly and clearly into the handset, to
end recording press #.
The message will then be played back through the handset.
10.8 Answer Only
With Answer Only selected, the caller will hear an announcement only and will not
be able to leave a message. The pre-set Answer Only outgoing message is “Hello,
your call cannot be taken at the moment and you cannot leave a message, so
please call later”.
If recording a personalised Answer Only message, remember to advise the caller
that no message can be left.
To reinstate either pre-recorded message, delete the personalised message.
10.9 Message Alert
When you have new messages, when the audible message alert is switched on,
you will hear an audible beep at the base every 7 seconds.
Press and hold Skip backwards to switch between message alert on and off.
10.10 Check the current OGM
Using the base:
Press On/Off, when the answering machine turns on the machine announces the
type of OGM and plays it.
Using the handset:
1. Press Menu, scroll Down to « TAM SETTINGS » and press Menu.
2. Scroll Down to « OGM SETTING » and press Menu.
3. « PLAY OGM » is displayed, press Menu.
4. Press Up or Down to select either « ANS AND REC » or « ANS ONLY » and
press Menu.
5. Listen into the handset earpiece to hear the current OGM.
10.11 Select the OGM
Using the handset:
1. Press Menu, scroll Down to « TAM SETTINGS » and press Menu.
2. Scroll Down to « ANS MODE » and press Menu.
3. Press Up or Down to select either « ANS AND REC » or « ANS ONLY » and
press Menu to confirm.
10.12 Re-instate the pre-recorded OGM
The personalised OGM can be deleted and the pre-recorded OGM restored.
