547297
25
Zoom out
Zoom in
Previous page
1/38
Next page
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press
/ MUTE button to turn on the unit. When the unit is on, press and hold
/ MUTE button to turn the unit off.
FACEPLATE RELEASE
Press
button to fold down the removable faceplate.
SOUND ADJUSTMENT
Shortly press SEL button to enter AUDIO SETTING mode, use SEL button to
select the desired adjustment mode. The adjustment mode will change in the
following order:
VOL > BAS > TRB > BAL > FAD
(Volume) (Bas) (Treble) (Balance) (Fader)
Shortly press
/ buttons to adjust the sound quality up or down step by
step, press and hold
/ buttons will change the sound quality continuously.
For SUBW, use the volume knob to select ON or OFF. The subwoofer output
cable is on the back of the unit.
SYSTEM SETTING
Press and hold SEL button on the front panel to enter SYSTEM SETTING mode. Then
shortly press SEL button to select the item you want to change and use
/
button sto change the corresponding setting.
BEEP ON/OFF: Use
/ volume up/down buttons to set Beep sound on
or off.
P-VOL: Use Volume Up/Down buttons to select the volume level when the unit
turns on.
AREA EUR/USA/ASE/S-A/JPN/RUS: Use Volume Up/Down buttons to set EUR or
USA area frequency spacing
HOUR 24H/12H: Use Volume Up/Down buttons to set 24Hours or 12Hours
format.
PCLK ON/OFF: Use Volume Up/Down buttons to set clock on or off when power
off, when set PCLK ON, clock will appear with backlight on when power off.
MUTE
Shortly press
/ MUTE button will mute the sound instantly, press it again will
resume the sound.
LOUDNESS
Press
/BAND button for several seconds to switch loudness function on and
“LOUD” will appear on the LCD.
Press it for several seconds again to release this function, and “LOUD” will
disappear.
DISPLAY INFORMATION
Press DISP button to operate as the conversion of each display mode.
EQUALIZATION
Press EQ/TA button shortly to turn on equalization function and to select desired
audio mode. There are several kinds of mode as below:
> FLAT > CLASSICS > POP M > ROCK M > DSP OFF >
RESET FUNCTION
Reset button must be activated with either a ballpoint pen or thin metal object.
The Reset button is to be activated for the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
Note: If pressing the Reset button has no effect, please use a cotton swab soaked in
isopropyl alcohol to clean the socket on the front panel.
EN
Instruction Manual
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MT Logic RD-3058MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MT Logic RD-3058MT in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info