523748
2
Zoom out
Zoom in
Previous page
1/2
Next page
4
cOnnecting
2
5
3d usage
set
Theviewinganglewhichisusedduringusageisofgreatimportance,especiallyforproper3D
imagesagoodplacementismandatory.Someexamplesaregivenintheimagesbelow.
• Pleasenotethatthewallbracketisnotincluded
• Forthemountingofthestandpleasereferthemanual.
HDMI SCART
Connecting an external receiver.
• Ifyouuseanexternalreceiveryoucanconnectolder
modelstoSCARTandnewermodelstoHDMI.Forview
-
ingHDchannelsandinteractiveTVconnectionthrough
HDMIismandatory.
Connecting cable TV.
• IfyouusecableforyourTVreceptionpleasemakesure
thelengthofthecablebetweenyourcableentrypoint
andyourTVisasshortaspossible,werecommendto
useasignalamplierafterevery10metersofcable.
Connecting a digital antenna.
• WhenyouarereceivingyourTVsignalbyantennaplease
makesuretouseanactivedigitalantenna,itiseasyto
recognizeanactiveantennabytheextra230VACadapt
-
erthatisusedtopowertheantenna.(TheCImodule
packagecontainsanactivedigitalantenna)Placingthe
antennaatawindowwillprovidethebestsignalquality.
Connect the TV on a grounded net socket, and put the
switch on the back of the TV on “1” (ON/OFF).
Placement
quick start guide
1
www.mtlogic.com/lE-427119mt
Installing the TV by using digital cable TV.
WhenyouchoosetoreceivedigitalTVbycablethenthe
providerwillgivethesettingsneeded,beforeenteringthe“rst
timeinstallationpleasemakesuretheCI+moduleisn’tplaced
intheCIslot.AlsomakesurethattheCI+moduleiscertiedby
yourproviderthiscanbecheckedbythelogoonthemodule.
If you use ZIGGO please use the following settings:
• Country:Netherlands
• TuneType:DTV
• DigitalType:DVB-C
• ScanType:Quick
• NetworkID:1111to9999
(for correct region codes please visit www.mtlogic.com/LE-427118MT)
• Frequency:164000to999000
(for correct region frequency please visit www.mtlogic.com/LE-427118MT)
• Symbolrate:6875
If you use UPC please use the following settings:
• Country:Netherlands
• TuneType:DTV
• DigitalType:DVB-C
• ScanType:Quick
• NetworkID:NoordBrabant=43144,NoordHolland=43136,
Flevoland=43138,Friesland=43140,Gelderland=43142,Zuid
Holland=43146
• Frequency:164000
• Symbolrate:6900
• AftertheautomaticsearchtheTVwillcomeupwithNED1HD,
puttheTVonstand-byandplacetheCI+moduleincludingthe
smartcardintheCIslot,ifyouturnontheTVagaintheTVwill
trytovalidatethesmartcard.
installing
3
Installing the TV with an external receiver.
Ifyouuseanexternalreceiveritisnotnecessaryto
searchforchannelsbutwerecommendthatyoudo
startthesearchandthenstopitbypressingthe“MENU”
buttonontheremotecontrolbypressingthebuttonto
therightthesearchwillend.Afterendingthesearchthe
TVwillcomeupwithDTVbypressing“SOURCE”onthe
remotecontrolyoucanselectSCARTorHDMI.Ifyouuse
thebutton“EXITtoskipthe“Firsttimeinstallationitwill
comebackthenexttimeyouturnontheTV.
Installing the TV by using analogue cable.
Ifyouuseananaloguecableconnectionpleaseselect
thefollowingsettings:
• Country:Netherlands
• TuneType:ATV
• AftertheautomaticsearchtheTVwillcomeupwithNED1(ATV).
Installing the TV by using a Digitenne CI module
package from KPN.
IfyouchoosetoreceivedigitalTVbyDigitennepleasemake
surethattheCImoduleandsmartcardarenotplaceddur
-
ingthechannelsearch.Selectthefollowingsettings:
• Country:Netherlands
• TuneType:DTV
• DigitalType:DVB-T
AftertheautomaticsearchtheTVwillcomeupwithNED1
(DTV),puttheTVonstand-byandplacetheCImodule
includingthesmartcardintheCIslot,ifyouturnontheTV
againtheTVwilltrytovalidatethesmartcard.
kPn | ZiggO | uPc
First read the safety guidelines in the manual before
using the 3D function.
• IfyouconnectaBlu-ray3DplayertoaHDMIportofthe
TVtheTVwillautomaticallyswitchto3Dmodewhena
3DBlu-raydiscisplayed,sometimesthe3Dmodewill
notturnonautomatically,inthiscaseyoucanstillturn
onthe3Dmodebypressingthegreen3Dbuttononthe
remotecontrolandselect“Framepacking”.
• Itisalsopossibletoplay3DlesfromUSBbydownload
-
ing“SidebySide,Framepacking”orTop/Bottommedia
lesorbylming3Dwitha3Dcamera.Theselescan
beplayedwiththeinternalmediaplayerthisbypressing
thegreen3Dbuttonontheremotecontrolandselecting
theright3Dmode.
Please note that the Smart TV mode doesn’t support 3D!
• Thelastoptionisthebuilt-in2Dto3Dconverterthis
functionisusableonall2Dhighdenition(HD)video
signals,thisoptionhastobeturnedonandointhe
picturemenu.ThisfunctionisavailableinDTV,HDMI1,
HDMI2enHDMI3mode.
Start up the Smart TV mode.
• Atstep2youhavereadaboutthepossibilitytoconnecttheTVtoyournetwork.Whenyouhave
connectedyourTVwithanEthernetcablepleasegotothesettingsmenuandselecttheoption
“Ethernetsettings”andtabonTurnonEthernet”leavetheEthernetmenubypressing“ESC”.After
approx.30secondstheTVwillobtainanIP-addressfromtheDHCPserver,assoonasanEthernet
logoappearsinthetoprightsectionofthescreenyourTVwillbeconnectedtoyourDHCPserver.
• WhenyouarechoosingtoconnecttheTVthroughWi-Fiyoucangotothesettingsmenuandselect
“Wi-FisettingsandtabonTurnonWi-Fi”leavetheWi-Fimenubypressing“ESC”.Afterapprox.30
secondstheTVwillobtainanIP-addressfromtheDHCPserver,assoonasanWi-Filogoappearsin
thetoprightsectionofthescreenyourTVwillbeconnectedtoyourDHCPserver.
• InstallationofapplicationsispossiblethroughtheAppmanager,withtheAppinstalleritispos
-
sibletoinstallsavedAppsfromUSBstickorSDcard.
• ItisalsopossibletoconnectyourpersonalaccounttoopentheMarketApp.whichwillgiveyouthe
possibilitytodownloadorinstallapplicationsdirectly.
TOO CLOSE
BEST 3D
TILT MOUNTED
BEST 3D
TV ON STAND
2


Need help? Post your question in this forum.

Forumrules
1

Forum

mt-logic-le-427119mt

Reset search

  • The smart said of the tv Tm logic smart 42 inch is dark and not working but tv stations are working Submitted on 20-4-2023 at 23:17

    Reply Report abuse
  • My smart said has gone dark but normal tv stations are working have restarted the tv but still the smart said is dak Submitted on 20-4-2023 at 23:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MT Logic LE-427119MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MT Logic LE-427119MT in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MT Logic LE-427119MT

MT Logic LE-427119MT User Manual - English - 42 pages

MT Logic LE-427119MT Additional guide - Dutch - 1 pages

MT Logic LE-427119MT Additional guide - Dutch - 2 pages

MT Logic LE-427119MT Additional guide - Dutch - 1 pages

MT Logic LE-427119MT User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info