523734

MT Logic CSR-3057MT Manual

39
Zoom out
Zoom in
Previous page
1/49
Next page
• STATION STORING
Press any one of the preset buttons (11) (1 to 6) to select a station, which had been stored
in the memory. Press this button for several seconds, current station is stored into
the number button.
• RDS (RADIO DATA SYSTEM) OPERATION
- Setting RDS mode
Press button (21) and release immediately to switch on or off RDS mode. Whenever
RDS is switch on, “RDS” will flash on LCD.
- USE PTY BUTTON (15)
1) Shortly press
PTY
button (17) will enter PTY SELECT mode, the program name will be
displayed on the LCD, you can use
/
(25) to select the items and press
/
buttons
(1) to begin search the corresponding program.
2) Press and hold PTY button (17) will enter RDS MENU, in the menu, use
/
(25) to select
the items and press
/
buttons (1) to adjust corresponding item.
• TA-SEEK
: SEEK/ALARM
a) TA SEEK mode:
When newly tuned station does not receive TP information for 5 seconds, the radio retunes
to next station which has not the same station (PI) as the last station, but has the TP
information.
When TP information gets lost at the current station for retune time which is set by RETUNE
SHORT or RETUNE LONG, the radio start to retune to next same PI station. When PI
station does not catch in one cyclic search, the radio retunes to next station with TP
information.
Note:
In TA SEEK mode, the current station can be changed to the completely different
station because the unit searches TP station when the field(signal) strength of the current
station is very weak, or the current station has no “TP” signal. (The higher priority is TP
rather than PI.)
38
UK
OPERATION
b) TA ALARM mode
When this mode is selected, any automatic retune mode is not activated. Only double
beep sound (ALARM) is output. So, in this mode, the unit keeps the current station anyhow.
(The PI priority is higher than TP.)
When newly tuned station doesn’t have TP information for 5 seconds, beeps come out.
When TP information gets lost at the current station for retune time, the beep sound is
output.
When newly tuned station has not RDS signal, “PI SEEK” is suppressed somewhat.
AF
SOUND/MUTE
While AF switching is implemented in C201 station, AF can switch to 100 MHz, which is
non genuine AF (where, different PI with same AF) in short “DIP”.
If a car cruises that critical area back and forth, an oscillation phenomenon can be
occurred, because the different PI code can be received from 100 MHz with “XXX” PI.
The car radio has special procedure to reduce even this kind of unavoidable situation
however there is a limit to be escaped from this serious case perfectly.
In that serious case, 2 mode is selectable as follows:
• PI:
100
100
PI: C201
PI: XXX
98
90
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MT Logic CSR-3057MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MT Logic CSR-3057MT in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info