547296
40
Zoom out
Zoom in
Previous page
1/49
Next page
39
OPERATION
UK
• MASK
: DPI/ALL
MASK DPI mode: masked only the AF which has Different PI (DPI). MASK ALL mode:
masked the AF which has Different PI and NO RDS signal with high field strength.
• RETUNE: LONG/SHORT
When PI information gets lost at the current station for retune time which is set by RETUNE
SHORT (30 sec.) or RETUNE LONG (90 sec.), the radio start to retune to next same PI
station.
a) PI SOUND mode:
When above different PI sound (DIP) is heard once in a while, the DIP’s sound will
be heard for a short time.
b) PI MUTE mode:
Under above same situation, a mute
sound will be heard for a short time.
The purpose of this function is to reduce unwanted EON TA switching, which EON TA
information was received from current station and the radio switched to that EON linked
station, but no information could not be received because the EON linked station is
located too far from that area. So the radio is switched back to current station again. In
above operation, a customer listens to a wrong program or mute sound for a while.
• EON TA : Local/Distance
• TA VOLUME: You can adjust the TA volume value in this item.
EON TA LOCAL mode
When the filed strength level of EON linked is less than threshold level, the radio does
not switch that station, and a customer can hardly listen to any disturbances.
EON TA DISTANCE mode
EON TA switch is tried to implemented by the information of current station.
• REGION
: OFF/ON
REGION ON mode: AF switching or PI SEEK is implemented to the station which have
all PI codes are the same as current station.
REGION OFF mode: The regional code in the format of PI code is ignored when AF
switching or PI SEEK is implemented.
-
Listening to Traffic Announcement
button (22) is operated as follows:
When pressed and held for several seconds, it is engaging whether
TA
mode on or off.
TA
When TA mode, is on and a traffic announcement is transmitted:
When the unit was in CD (MP3) mode or AUX IN mode, it will switch
temporarily to radio mode. Temporary switch over to an EON linked station when EON
detects a traffic announcement on that other program. If the volume level was under the
threshold point it will be raised to the threshold point. But the user changed the volume
level, which was more than the threshold point (min.
TA
volume level), it will be set to the
last level. When
TA
mode is on,
TA
of individual segment is turned on.
When a TP station is received, TP of individual segment is turned on.
TA
interruption function
The current traffic announcement is cancelled by pressing this key. But the
TA
mode will
not be off.
The RDS data used are the PI, PS, AF, TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data expressed in alphanumerically characters
AF: Alternative Frequencies
Frequency list of broadcasting stations transmitting the same program
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MT Logic CSR-3056U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MT Logic CSR-3056U in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info