Manual MSW MSW-PG3000W (page 33 of 165) (English, German, Danish, French, Italian, Spanish)

779189

Zoom out

Zoom in

1/165

The unit is delivered almost ready, and only the wheels and the feet need to be

mounted (see above pictures).

First, put the wheel with the protruding part of the rim on the unthreaded side of

the axle shaft, and on the other side secure the rim by first putting a washer on it

and then inserting a clip up to the head in the hole at the end of the axle shaft. Bend

the ends of the pin protruding from the other side of the hole around the axle to

protect the wheel against falling off.

Repeat the operation for the second wheel. The wheels assembled in the way with

half-shafts should be fixed in the holes provided in the frame of the unit, securing

them from the inside of the unit with washers and flange nuts.

In order to assemble the feet, first fix the rubber stoppers to the U-shaped brackets

with 2 bolts and flange nuts.

Then attach the feet prepared in such a way to the underside of the frame using

the 4 bolts and the appropriate flange nuts provided (2 for each foot).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MSW MSW-PG3000W in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MSW MSW-PG3000W Manual

Product: