Manual MSW MSW-PG2800 (page 38 of 165) (English, German, Danish, French, Italian, Spanish)

779188

Zoom out

Zoom in

1/165

IMPORTANT: do not operate unit without the air filter!

k) Check the condition of the spark plug regularly - clean it if dirty, and check the

electrode gap before reassembly and adjust if necessary.

• To access the spark plug, first remove the ignition cable pipe from the spark

plug. Then the spark plug can be unscrewed.

IMPORTANT: it is best to remove the spark plug when the engine is cold or at

least cooled down.

IMPORTANT: A spark plug that has recently been in operation can be hot - risk

of burns!

l) Clean the fuel filter regularly

• The screen fuel filter is located at the bottom of the fuel valve. To access it,

first turn off the fuel valve when the machine is off - set its lever to the "OFF"

position.

Then unscrew the fuel filter housing located on the bottom of the valve (see

left picture below).

After unscrewing the housing, remove the filter and clean it (e.g. rinse in

extraction gasoline and blow under low pressure).

Install the filter in the reverse order of removal, but make sure to also attach

the sealing ring (see following image on the right).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MSW MSW-PG2800 in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MSW MSW-PG2800 Manual

Product: