779188

MSW MSW-PG2800 Manual

28
Zoom out
Zoom in
Previous page
1/165
Next page
b) Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c) Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
d) Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
e) Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f) To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
g) When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
h) Avoid situations in which the machine stops under heavy loads during
operation. This can cause overheating of the drive elements and consequent
damage to the equipment.
i) Do not move, shift, or rotate the machine while in operation.
j) Do not leave the unit switched on unattended.
k) Clean the unit regularly to prevent permanent dirt build-up.
l) The provided value of vibration emission is measured according to the
standard measurement methods. The value of vibration emission may change
if the unit is used under different environmental conditions.
m) Do not obstruct the air inlet or outlet.
n) Do not start up an empty unit.
o) Do not tamper with the unit to alter its performance or design.
p) Keep the unit away from sources of fire and heat.
q) Do not overload the unit.
r) Do not block the ventilation openings of the unit!
s) Add oil to the proper level before turning on the machine. If the oil level is too
low the motor will not start or may shut down.
t) Report any leakage of operating oils from the machine to the relevant
authorities or comply with the legal requirements in your area of use.
u) Danger! Health hazard and risk of explosion of the combustion engine.
v) The engine exhausts contain poisonous carbon monoxide. Remaining in an
environment containing carbon monoxide can lead to unconsciousness or
even death. Do not run the motor in an enclosed area.
w) Keep the engine away from heat, sparks and flame. Do not smoke near the
machine!
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MSW MSW-PG2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MSW MSW-PG2800 in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info