764810
23
Zoom out
Zoom in
Previous page
1/103
Next page
LED READING CAUSE SOLUTION
E0
E1
Water temperature is lower than 0°C
degree or exceeds 55°C (131°F)
Temperature sensor failure
Waterflow switch failure
Filter failure
Water level is not at minimum water line
Contact the MSpa Service Center.
Add water above the minimum line.
Change the water or contact the MSpa
Service Center.
ERROR CODE CHART
23
BUBBLE AIR
BLOWER DOES
NOT WORK
Auto-off 10 minutes
Unidirectional threshold is not open
Control panel failure
Inflation knob is in <ON> position
Wait for 10 minutes
Contact the MSpa Service Center
Contact the MSpa Service Center
Turn the knob to <OFF> position and turn
on the bubble button again.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
NO DISPLAY ON
THE WIRED
CONTROLLER
Power failure
PRCD is off
PRCD broken Contact the MSpa Service Center
Contact the MSpa Service Center
NOT HEATING
PROPERLY
Temperature set too low
Dirty filter cartridge
Heater failure
Filter pump broken
Set a higher temperature
Clean or replace the filter cartridge
Add more water to the minimum line
Contact the MSpa Service Center
Contact the MSpa Service Center
Press the Reset button, Control
Panel is not displayed
Water level is not at the minimum
water line
Reset PRCD by following PRCD Testing
section
Check power supply
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MSpa Premium - Camaro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MSpa Premium - Camaro in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info