764822
16
Zoom out
Zoom in
Previous page
1/98
Next page
16
WATER MAINTENANCE AND CHEMICALS
MAINTENANCE
Water Sanitation
The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if
necessary). Adding sanitizer or other chemical will control bacteria and viruses reproduction in the spa water.
The maintenance of a proper water balance through appropriate use of sanitizers is the most important factor in
maximizing the life and appearance of the spa as well as ensuring clean, healthy and safe water.
Proper technique is important for water testing and treating the spa water. See your spa professional for
chemical, sanitizer, test kit and testing procedures questions.
Cumulative use up to 150hrs, or cleaning
reminder is activated
Clean the filter cartridge or change a new one
The filter cartridge may need to be replaced
within 150hrs for initial use.
Check water quality in time and adjust to
recommended range
Not in used for 2~3 days or longer Use an overall cover for protection
Use water treatment products to adjust
TIMER
FREQUENCY ACTION
Filter
Cartridge
SPA
Filter Cartridge Cleaning Reminder: When red light keeps flashing (Filter
function is OFF) or red and green lights alternately flashing(Filter function is
ON), the filter cartridge shall be cleaned or replaced. After that, press Filter
button for 3s to delete the reminder.
IMPORTANT: The following conditions will lead to slow water heating
Ɣ7KHDPELHQWWHPSHUDWXUHLVORZHUWKDQ&)
Ɣ2XWGRRUZLQGVSHHGLVDERYHPVPSK
Ɣ7KHDLUEXEEOHIXQFWLRQLVDFWLYDWHGZKHQKHDWHULVRQ
Ɣ7KHVSDLVQRWSURSHUO\FRYHUHGZLWKWKHVSDFRYHUZKHQWKHKHDWHULVRQ
NOTE: Default setting temperature is 38°C; Temperature setting range: 20 - 40°C.
Controller Locking: Press UP and DOWN button at the same time for 3s, the buzzer will ring 3
times, meaning that the controller is locked. In this mode, function will not be turned on if the button
is pressed. Press UP and DOWN button at the same time again for 3s to unlock the controller.
Timer Button: Press the TIMER button to enter intelligent pre-setting mode. By pressing UP and
DOWN button, you can set and start heating automatically in up to 99 hours. The TIMER setting is
confirmed if no further operation in more than 3s or press TIMER button again. The heater will start
working after current setting hours. The setting hour can also be changed by entering the
pre-setting mode again. The light of TIMER button flashes green when activated.
Cancel: Press the TIMER button for 3s to cancel the pre-setting.
NOTE: The pre-setting function cannot be turned on during heating process. The pre-setting mode
will also end after heating function is on or after the spa is reboot.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MSpa Delight - Starry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MSpa Delight - Starry in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info