Manual MSpa Concept Mono (page 12 of 100) (English, German, French, Spanish)

764816

Zoom out

Zoom in

1/100

SPA SET-UP

3. Connect the control box to the spa pool in right order. (There should be sealing ring at each connection point.)

4. Unscrew the valve cap and make sure that the center valve pin is in the “UP” position. If it is in the “DOWN”

position, press down on the valve pin and turn it counterclockwise until it pops up.

5. Attach the pressure gauge and the pump hose to the pump and secure it tightly. Connect the pump nozzle into

the valve receptacle on the spa body, and tighten it clockwise.

6. Start pumping air into the SPA tub by sliding the pump piston up and down, inflate the spa to 12 - 15PSI.

1. Spread out and connect the 9 pcs foam mat at a cleared area. Heat Preservation Mat prevents heat loss from

the bottom of the unit.

2. Put the pool body on the mat (note that the drain valve is in the appropriate area)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MSpa Concept Mono in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MSpa Concept Mono Manual

Product: