646252
7
Zoom out
Zoom in
Previous page
1/22
Next page
13
12
C. Adding Water and Ground Coffee
1. Open the brew basket lid. For your
convenience, you can lift out the removable
filter basket.
2. Place a MR. COFFEE
®
brand 10-12 cup
paper basket-style filter or a MR. COFFEE
®
permanent filter into the removable filter
basket (Figure 5).
NOTE: If using paper filters, it is important that
the sides of the filter fit flush against the side of
the filter
basket. If filter collapse occurs, dampen
the filter before placing in the filter basket and
adding ground coffee and water.
3. Add the desired amount of coffee and
gently shake to level the coffee. See the
Suggested Coffee Measurement Chart.
4. After following instructions in the Water Filtration System, place the MR. COFFEE
®
water filter in the basket, making sure that the side marked “this side up”
faces you and that the water filter is level.
5. Be sure the removable filter basket is properly centered and all the way down in
the brew basket and close the lid.
6. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces)
For easy and accurate filling, the water markings on the glass decanter and on the
water window show the amount of water needed to make the corresponding
desired number of cups. Do not fill past the “12 cup MAX line” or water will flow
out of the overfill hole in the back of the coffeemaker.
The amount of coffee brewed will always be slightly less than the amount of water
poured in the water reservoir. This is due to the minimum absorption of water by
the coffee grounds.
7. Lift the pour through reservoir lid and pour the water into the water reservoir.
Close the lid and place the empty decanter onto the warmer plate.
NOTE: Make sure the decanter is fully placed on the warming plate or the water and
the grounds will overflow from the filter basket. An overflow may cause personal
injury or damage to property.
CAUTION! To reduce the risk of damaging the decanter and/or the risk of
personal injury, do not add cold water to the decanter if the decanter is
already hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1. After completing the steps in the Adding Water
and Coffee section and with the glass decanter
and the filter basket securely in place, turn the
coffeemaker on by pressing the SELECT button
once. The BREW NOW green light will turn on to
signal that the coffeemaker is on and brewing
(Figure 6).
2. To enjoy a more full flavored cup of coffee, press
the Brew Strength button once. The STRONG Brew
Strength red light will turn on. The coffeemaker
will remain in the Brew Strength you have selected
until you change it back to regular strength by
pressing the Brew Strength button or until you
unplug the machine (Figure 7).
3. After the used coffee grounds have cooled,
carefully remove the filter basket and discard them.
NOTE: Always allow the coffeemaker to cool down
before cleaning.
F
IGURE
5
FIGURE 6
F
IGURE 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mr Coffee JWTX95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mr Coffee JWTX95 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info