649524
2
Zoom out
Zoom in
Previous page
1/19
Next page
QUICK REFERENCE
1. SOURCE/AL. OFF
Use this button to select AM or FM band.
Use this button to turn the ALARM off after Alarm activates.
2. TIME/MEM/M+
Use this button to set the clock
Use this button to store radio stations in the memory.
Use this button to select the stored radio stations in the memory.
3. VOL- / AL2
Use this button to decrease the volume.
Use this button to set the alarm time in ALARM 2.
4. VOL+/ AL1
Use this button to increase the volume.
Use this button to set the alarm time in ALARM 1
5. TUN - / MIN
Use this button to search the radio station in backward direction.
Use this button to adjust the minute in CLOCK or ALARM time.
6. TUN + / HR
Use this button to search the radio station in forward direction.
Use this button to adjust the hour in CLOCK or ALARM time.
7. SNOOZE / SLEEP
Use this button to temporarily suspend the ALARM for a short period.
Use this button to set the sleep time.
8. LED DISPLAY
Display for the clock and the radio frequency.
9. AL1-B INDICATOR
This indicator shows that the unit is in ALARM-1 buzzer mode.
-EN2-
10. AL1-R INDICATOR
This indicator shows that the unit is in ALARM-1 radio mode.
11. AL2-B INDICATOR
This indicator shows that the unit is in ALARM-2 buzzer mode.
12. AL2-R INDICATOR
This indicator shows that the unit is in ALARM-2 radio mode.
13. SPEAKER
Sound output.
14. FM WIRE ANTENNA
Extent this wire antenna to obtain better FM broadcasting.
15. DC JACK
Connect the unit to the AC/DC adaptor.
16. BATTERY COMPARTMENT
Compartment for the back-up battery.
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC
wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-3 batteries into the battery compartment. Be sure to observe the proper
polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the
stored radio stations are preserved in the memory of the unit by means of battery back-up
function.
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the TIME/MEM/M+ button for about 1 second,
the time will begin to flash on the LED display.
2. Press the TUN+/HR button to adjust the hour.
3. Press the TUN-/MIN button to adjust the minute.
4. When the correct time is selected, press the TIME/MEM/M+ button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the VOL+/AL1 or VOL-/AL2 button. The ALARM time
will begin to flash on the LED display.
2. Press the TUN+/HR button to adjust the alarm hour.
3. Press the TUN-/MIN button to adjust the alarm minute.
4. When the correct time is selected, press the VOL+/AL1 or VOL-/AL2 button to confirm.
5. Press the VOL+/AL1 or VOL-/AL2 to select the ALARM sound mode - buzzer or currently
set radio station. The alarm buzzer or radio indicator will light up.
-EN3-
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mpman FRA115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mpman FRA115 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info