493932

Mpman DAB320 Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
DAB auto tune modes
There are two types of auto scan modes, one is local auto scan and the other is full auto scan. Local auto scan will
only search for part of the DAB Band III channels and full auto scan will search for the entire DAB Band III channels.
After the scan has finished, the first alphanumerically found station will be automatically selected.
1. To activate the auto scan modes, first press the MENU button to enter into the Tune Select Menu, then press
the SCROLL ▲ or ▼ button to select “Local scan” or “Full scan”, finally press the SELECT button to confirm,
the display will show “Scanning …” and a progressing slide bar. (F.4) (F.5)
2. All the stations that have been found will be stored automatically, to explore the found stations, press the
SCROLL ▲ or ▼ buttons; and when you find a station that you would like to listen to, press the SELECT
button
F4
F5
DAB manual tune
1. To select manual tune, first press the MENU button to enter into the Tune Select Menu, then press the
SCROLL ▲ or ▼ buttons to select “Manual tune”, finally press the SELECT button to confirm. (F. 6)
2. Press the SCROLL ▲ or ▼ buttons to move through the DAB channels, the display will show “5A to 13F”
and their associated frequencies. (F. 7)
3. When your desired frequency appears in the display, press the SELECT button to confirm. The name of the
station group (ensemble/multiplex) will be displayed.
4. To listen to the station selected, press the SELECT button again.
F6
F7
DAB secondary services
On some occasions you will see a “>” symbol directly after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted
directly after the primary station.
DAB display modes
Every time you press the DISPLAY/INFO button, the display will cycle through the following display modes:
Time/Date
Ensemble/Multiplex (Group name)
Frequency
A
udio Bit Rate
Signal strength
DLS
Programme Type
Time and date
The time and date will be automatically updated by the broadcasted information; it is no need to set the clock
manually. In the unlikely event that no clock information is received, the display will show “[No Time]”.
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate being received.
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their
transmissions. The message usually includes information such as programme details …etc.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be
from left to right.
UK-3
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mpman DAB320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mpman DAB320 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info