493931
27
Zoom out
Zoom in
Previous page
1/32
Next page
REMOTE CONTROL
1
2
3
4
5
6
8
9
10
11
12
13
14
16
15
7
1. STANDBY/ON BUTTON
2. DISPLAY/INFO BUTTON
3. REPEAT BUTTON
4. PROGRAM BUTTON
5. RANDOM BUTTON
6. MUTE BUTTON
7. DAB/FM BUTTON
8. CD BUTTON
9. STOP/MENU BUTTON
10. PLAY/PAUSE/SELECT BUTTON
11. SCROLL / I◀◀ BUTTON
12. SCROLL / ▶▶I BUTTON
13. PRESET - BUTTON
14. PRESET + BUTTON
15. VOLUME - BUTTON
**
**
Battery Included
16. VOLUME + BUTTON
PUTTING THE BATTERY INTO THE REMOTE CONTROL UNIT
1. Press the battery compartment gently according to the direction
indicated in the illustration.
2. Slide to open the battery compartment.
3. Insert the supplied CR2032 battery into the compartment according to
the polarity markings ("+" and "-") inside the compartment and on the
battery. Replace the battery compartment until it clicks.
NOTE: Remove the batteries from the remote control if not in use for long
period of time. Replace with new batteries when the batteries become
weak, otherwise the remote control will not function properly.
LISTENING TO YOUR RADIO
Hints for better reception
This unit is fitted with a single lead wire DAB/FM antenna, to obtain the best performance, you should fully extend
the wire antenna and adjust the position as well as the direction until you find the best reception. For ideal DAB
reception, always maintain the lead wire antenna in a vertical position (holding it upward or downward behind the
unit) is highly recommended.
Getting started – DAB mode
When the unit is powered up for the first time, it will be in standby mode. The display will show “00:00” and “Setting
clock …”. Press the STANDBY/ON button once to switch the unit on, it will automatically enter into the DAB mode
and perform full auto scan function. During the scan the display will show “Scanning …” together with a slide bar
that indicates the progress of the scan and the amount of stations that have been found so far. (F. 1) (F. 2) (F. 3)
F2
F1
F3
Once the scan has finished, the radio will select the first alphanumerically found station. You can now press the
or button to explore the found stations and then press the SELECT button to select your station.
Note: If there is no stations found after auto scan, the radio will enter into the Tune Select Menu and the display
will show “Manual tune”, you can now press the SELECT button to select manual tune or press the SCROLL
or buttons to select auto scan modes for stations.
Clock setting
UK-2
The clock will only set and be updated if you can receive DAB signals in your location. In order for the clock to
synchronise to the current local time you must leave it one DAB station for a short period. Manual clock setting is
not required.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mpman DAB200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mpman DAB200 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info