769576
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
EN
BEFORE FIRST USE
1. Remove the appliance from the box. Remove all plastic sheets, bags and styrofoam in serts.
2. Wash all parts (except for the housing) in warm soapy water.
3. Make sure that your mains power supply corresponds to the voltage stated on the rating
plate.
4. Make sure that the appliance is off before plugging.
ASSEMBLY
1. Place the appliance on a sturdy, level and dry surface
2. Insert the mincing chamber (7) into the housing (4) with the feed tube upwards and tilted 45°
to the right from the vertical as seen from the mincing chamber seat in the housing.
3. Press and hold the safety-lock button (3) of the mincing chamber, while turning the mincing
chamber feed chute upward (7). Now, release the safety-lock button (3).
4. Insert the feed screw (8) into the mincing chamber (7) with the splined end to the inside (7). Next,
mount the stainless steel cutting blade (9) on the feed screw (8) outer tip with the sharp edge
blades outwards.
5. Next, fit one of the mincer screens (10), (11), (12) and screw on the ring collar (13).
6. When making sausage, replace the cutting blade (9) and one of the screens with the inner
part of the pate attachment (15) and the sausage nozzle (14), and tighten the ring collar all
the way up (13).
7. Fit the food tray (2) onto the mincing chamber in the right position.
MINCING MEAT
WARNING! Never use the appliance for mincing bones, nut shells and food with tough tendons.
WARNING! To avoid jamming, do not overload the appliance.
WARNING! If any hard material blocks the mincer screen or cutting blade, immediately switch off the appliance
and remove the obstruction.
1. Cut meat into small chunks for easy feeding into the mincing chamber.
2. Plug in and switch on the appliance using the ON/OFF switch (5).
3. Guide seasoned meat through the feed tube using the pusher (1).
4. When finished mincing, switch the mincer off using the ON/OFF switch (5) and unplug it.
5. If the meat does not go through the mincer screen and the mincer runs heavy, turn the minc-
er off by setting the ON/OFF switch (5) OFF, set the ON/R button (6) R, and set the ON/OFF
switch (5) R. When the meat moves back inside the mincing chamber, turn the mincer off by
setting the ON/OFF switch (5) OFF. Next, clean the mincer parts of meat and strings.
MAKING SAUSAGES
1. Prepare the required amount of minced and seasoned meat. Fit the feed screw (8), the inner
part of the pates attachment (15) and the sausage nozzle (14) inside the appliance and screw
on the ring collar (13).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MPM MMM-06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MPM MMM-06 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info