575298
14
Zoom out
Zoom in
Previous page
1/34
Next page
11 of 31
5.11. Connecting IEEE 1394 (FireWire) devices (optional)
ATTENTION!
Do not connect your IEEE 1394 devices until you have finished the initial setup of your new PC. This will prevent any un-
necessary interference during the installation. These devices can generally be connected while the PC is running. Please
refer to the operating manual for your peripheral device.
The PC’s IEEE 1394 voltage outputs are protected by a fuse (limited power source in accordance with EN60950). This en-
sures that peripheral devices connected using the sockets in question cannot be damaged in the event of a technical fault
with the PC.
PLEASE NOTE!
In order to prevent damage to the contacts, make sure that the plug and the socket fit together perfectly. Due to its
asymmetric form, the plug will only fit into the socket in one position.
Connect the IEEE 1394 cable to your PC’s IEEE 1394 port.
5.12. Connecting a n etwork (LAN)
You can prepare your PC for network operation using the network socket.
A network cable usually has two RJ45 plugs meaning it does not matter which end is plugged into which socket.
Plug one end of the network cable into the PC socket.
Connect the other end to another PC or a hub/switch.
For more information see the chapter Network Operation”.
5.13. Aerial socket for TV reception (optional)
5.14. Analogue TV reception
Connect the TV socket on your TV card to your terrestrial aerial or cable TV.
5.15. DVB-T TV reception
Where DVB-T and digital services are offered locally, you can make use of these services by connecting an appropriate aerial
(not supplied).
Connect a DVB-T aerial to the TV socket on your TV card.
5.16. DVB-S TV reception
You can watch television from your digital satellite system via the DVB-S socket.
Connect your satellite system to the TV socket on your TV card.
5.17. Connecting audio input/recording source
This socket is used to connect external analogue audio sources (e.g. stereo system, synthesizer).
Plug the connection cable into the light blue socket using the 3.5 mm stereo jack plug.
5.18. Connecting power supply
Finally, connect the power supply for your PC and the monitor.
Plug the power cable into the socket and connect it to your PC’s mains cable socket.
Please note the following safety advice:
DANGER!
Even when the mains switch is off, some components of the device are live. In order to disconnect the power to
your PC or to completely isolate the device from voltage sources, remove the mains plug from the mains
socket.
The socket must be close to the PC and easy to access.
Only operate the PC on earthed socket outlets of the household electricity network.
Only use the mains connection cable supplied.
For extra safety, we recommend using an overvoltage protection device to prevent your PC from sustaining damage as a
result of power surge s or lightning strikes.
The standard PC mains adapter has an on/off switch. This can be used to turn the PC on or off. When the switch is at OFF
(0), no power is being consumed.
Do not start up your PC yet!
First read the next chapter for some helpful tips on initial operation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MP Elite Power G645 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MP Elite Power G645 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MP Elite Power G645

MP Elite Power G645 User Manual - German - 37 pages

MP Elite Power G645 User Manual - Dutch - 37 pages

MP Elite Power G645 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info