Manual Mountfield EL 420 Li 48L (page 32 of 42) (English, Italian)

765495

Zoom out

Zoom in

1/42

EN - 5

Stop.

6. USING THE MACHINE

The safety regulations to follow are described in

chap. 2. Strictly comply with these instructions to avoid

serious risks or dangers.

6.1 PRELIMINARY PROCEDURES (Fig.16)

Make sure the safety key is not inserted in its housing.

Do this when the blade is stationary.

6.1.1 Checking the battery (Fig.17)

6.1.2 Preparing the machine before starting work

NOTE This machine can be used to mow lawns in a

number of dierent ways; before starting work, prepare

the machine based on how the lawn is to be mowed.

a. Preparation for grass cutting and

collection in the grass catcher (Fig.18)

b. Preparation for mowing and grass rear

discharge onto the ground: )

c. Preparation for mowing and mulching (Fig.20)

6.1.3 Cutting height adjustment (Fig.21)

6.1.4 Handle inclination adjustment Fig.8, Fig.12)

6.2 SAFETY CHECKS

Always carry out the safety checks before use.

6.2.1 General safety check

Object Result

Grips Clean, dry.

Handle 

Blade Clean, not damaged or

worn, well sharpened.

Rear discharge guard;

grass catcher

Good condition. No

damage. Properly installed.

Replace if damaged.

Control lever The lever must move

freely, it must not need

forcing and should

return automatically

and rapidly back to

the neutral position.

Battery No damage to the casing,

no liquid leakage.

Screws/nuts on the

machine and on the blade

Correctly tightened

(not loose). Not

damaged or worn.

Machine No signs of damage

or wear. No abnormal

vibrations. No

abnormal sound.

Action Result

1. Start the machine (par.

6.3).

2. Release the switch



1. The blade should

move.

2. The lever should

automatically and

quickly return to

neutral position, the

engine must switch



must stop within

a few seconds.

If any of the results fail to match the indications

provided in the tables, do not use the machine! Contact

a service centre to have it checked and repaired if

necessary.

6.3  (Fig.23÷25)

Ignition of the motor simultaneously engages the

blade.

6.4 OPERATION (Fig.26)

IMPORTANT If the motor stops because

it is overheated whilst mowing, you must wait

approximately 5 minutes before restarting it.

6.4.1 Grass cutting (Fig.27, Fig.28)

NOTE Regulate the forward speed and the

cutting height considering the conditions of the

lawn (the height, density and dampness of the

grass) and the amount of grass collected.

6.4.2 Emptying the grass catcher 

6.5 STOP 

The blade will continue to rotate for a few seconds

after disengagement or after you have switched o the

motor.

IMPORTANT

Always stop the machine:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mountfield EL 420 Li 48L in the language / languages: English, Italian as an attachment in your email.

The manual is 10,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mountfield EL 420 Li 48L Manual

Product: