721149
12
Zoom out
Zoom in
Previous page
1/45
Next page
Make sure to clean the inside of the screw (C) carefully; if necessary, use the brush (P).
Clean the residue exit (K) with a lightly moist and non-abrasive sponge.
The pusher (A), the feed tube (B), the bowl (G), the screw (C), the juice collector (H) with
the spout with drip-stop (I), the jugs (N), and the foam separator (O) can all go into the
dishwasher. If the filters (D/E) are clogged, prewash them with warm water and washing up
liquid and use the brush (P). If the filter residue exit is clogged, remove the residues using the
other end of the brush (P).
Do not clean the juice collector (H), the spout with drip-stop (I), the plastic parts (bowl (G),
food presser (A), feed tube (B)) with the abrasive side of the sponge.
Tips: To extract the screw (C) from the filter (D/E), turn both pieces together and then press
on the screw.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS SOLUTIONS
The appliance does not turn
on
- Make sure that all parts are correctly assembled.
- Make sure that your appliance is properly plugged in.
- Check that the feed tube (B) is correctly locked in
position.
The appliance stops suddenly
while functioning: the red
light flashes
- Press the Start/Stop button (M) to switch off the
appliance.
- Start your appliance again. If the safety mechanism
shuts the appliance off again, take it apart, clean it and
turn it on again.
- Make sure that the screw (C) is not blocked.
The appliance turns off: the
white light flashes
- This is a safety mechanism. We recommend that you let
the appliance cool down for a few minutes, clean it, and
then restart it by pressing the Start/Stop button (M).
Poor Juice Extraction - Clean the appliance: wash, rinse out and dry: the feed
tube (B), the pressing screw (C), the filter (D or E),
the residue strap (F), the bowl (G), the jugs, the spout
(H and I) and the dry residue colector (Q).
- Make sure that the strap (F) is correctly positioned on
the filter (to collect residues) and that it is in good
condition.
Problems related to leaking - Check that all parts are correctly assembled, especially
the spout with drip-stop (I).
6
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex ZU500A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex ZU500A in the language / languages: All languages as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info