Manual Moulinex Solea A CG2 (page 6 of 21) (All languages)

4728

Zoom out

Zoom in

1/21

APPLIANCES WITHOUT FITTED PLUG

FITTING A PLUG - IMPORTANT

The wires in the mains lead are coloured in

accordance with the following code:

GREEN & YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours in the mains lead of this

appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows:

The wire which is coloured GREEN &

YELLOW must be connected to the terminal

in the plug which is marked with the letter ‘E’

or by the earth symbol

or coloured green

or green and yellow. The wire which is

coloured BLUE must be connected to the ter-

minal which is marked with the letter ‘N’ or

coloured black.

The wire which is coloured BROWN must be

connected to the terminal which is marked with

the letter ‘L’ or coloured red.

This appliance is manufactured to conform to

the Low Voltage Electrical Equipment (Safety)

Regulations 1989 and is designed to comply with

BS 3456. It complies with the requirements of

the EEC Directive (89/336/EEC).

- This appliance must be used with an earthed

connection

- If the mains lead is damaged it must be

replaced by a Moulinex approved service

centre, as special tools will be necessary.

- Do not let the mains lead hang loose within

reach of children

- Never use the coffee pot in a micro-wave oven

- This appliance is for domestic use only

Practical Hints

- Only fill the water tank with cold water

- Always remember to replace the cover on

the coffee pot to ensure operation of the anti-

drip function

- When using your coffee maker for the first

time, rinse the coffee pot and run the coffee

maker with a full tank of water but without

coffee grounds.

- Check there is no hot coffee left in the filter-

holder before removing it

- The length of the mains lead can be adjusted

by pulling it or by pushing it into the appliance

Using the Coffee Maker

. USING THE COFFEE POT

You can prepare 15 small or 10 large cups of

coffee and keep the coffee warm on the hot

plate

- Fill the water tank (A) with cold water

following the water level indicator.

- Move the filter holder (C) to the side and pour

your coffee grounds into a no.4 filter

positioned in the filter-holder. Replace the

filter-holder

- Place the coffee pot , with the lid in place,

on the hot plate (F)

- For models with flavour strength selector,

choose a normal

or strong

coffee

using the selector (G). Choosing the latter

setting will mean that the coffee will take lon-

ger to filter through

- For the Duo model, set the selector (H) to

position

- Use the switch (E) to start the machine. The

red indicator will come on to show that the

coffee-machine is heating up.

- An anti-drip system allows you to remove

the coffee-pot for the necessary time it takes

to pour the coffee, while it is being made.

- Replace the coffee pot quickly to avoid an

overflowing of the filter holder.

. USING CUPS (Duo model)

A switch on the filter-holder allows you to

choose coffee to be filtered into 1 or 2 cups.

The duo stand (I and J) supports the cups.

Slightly raised, it will avoid any splashes and

allow the coffee excess to be collected.

- Fill the water tank with cold water according

to the cups you are using (you can pour from

the cups directly to determine the quantity).

The Duo marking on the water level indicator

reminds you not to exceed the maximum

water level indicator

- Place the Duo stand (I and J) on the hot-

plate

- Place the two cups (or one large cup) on the

stand underneath the coffee spouts.

- Set the selector (H) to

(the holes of the

filter holder are closed) and press the switch

(E)

- When the water tank is empty, set the

selector (H) to

to let the coffee flow into

the cups

- Once the cups are full, reset the selector (H)

to stop the flow.

Maintenance

. Removing scale (after every 40 uses)

To remove the scale from your appliance, you

can use:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Solea A CG2 in the language / languages: All languages as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Solea A CG2 Manual

Product: