4906

Moulinex Odyssey 4000 A DZ4 Manual

10
Zoom out
Zoom in
Previous page
1/62
Next page
16
total capacity of the tank (K) at maximum.
Do not add any further water.
- Close the hatch or replace the “Master
Spray” assembly (depending on model).
Note: Never fill the tank (K) via the opening in
the “Pro Calc System” cassette (L) at the rear
of the tank.
. Getting started:
- Plug in the iron.
- Select the temperature of the soleplate with
the temperature adjustment control (H).
The temperature control indicator (I) will come
on; it will go out once the selected temperature
has been reached.
On first use, a little smoke may be given off by
the soleplate of the iron. This is temporary and
does not mean there is anything wrong with
the iron. This should not happen again.
. Steam ironing:
You have 2 steam flow positions:
or
Steam ironing is only possible in the steam
zone (.. to MAX). To obtain steam, position the
temperature adjustment control (H) in this
zone.
- Before commencing your ironing, wait for the
adjustment indicator (I) to go out and check
(depending on model) that the “Thermo
Sensor” indicator (J) has gone out.
- Select the steam flow rate using the steam
control (G).
Important:
To prevent any water dripping onto your
laundry, this iron is equipped with an “anti-
drip” system which shuts off the flow of water
as soon as the soleplate falls below a certain
temperature.
. Pressing
One push on the pressing button (F) allows
you to obtain a very powerful jet of steam
instantly.
- Never exceed 5 pushes in succession,
otherwise your iron may drip water from the
soleplate.
- Always use this function in the steam zone
indicated on the temperature adjustment
control (H).
When using the pressing function for the first
time, small deposits of limescale may come
out of the holes in the soleplate with the jet of
steam. So we recommend that you do not
carry out the first pushes directly over your
laundry.
. Vertical removal of creases (depending
on model):
You have the option of using your iron in the
vertical position to remove creases from
garments on hangers, curtains, etc...
- Set the temperature adjustment control (H)
to MAX.
- Hold the iron vertically close to the fabric,
without touching it leave at least a 2’’ gap.
- Push the pressing button (F) at the rate of
not more than once per second.
The steam produced is not always visible but
it still has the ability to remove creases.
You can push the button up to 5 times in
succession.
Important:
- Do not use this function for synthetic fibres.
- Keep the iron at a sufficient distance from
the fabric to avoid any risk of scorching.
- The steam produced is very hot, so never
remove creases from a garment when a
person is wearing it; it must be on a hanger.
. Dry ironing:
- Set the steam control (G) to position
.
. Spray:
- Push on the spray button (E) in pulses. A
spray of cold water allows you to dampen
your laundry in both dry and steam position.
Very effective for removing creases.
. “Thermo Sensor” indicator (J) (depending
on model)
The indicator (J) situated at the front of the
handle of the iron informs you if the temperature
of the soleplate is too high in comparison with
the setting chosen on the temperature
adjustment control (H).
Each time you appreciably reduce the
temperature adjustment control (H), the
“Thermo Sensor” indicator (J) comes on to
warn you that the soleplate is too hot and that
you risk scorching or damaging the fabric.
- Wait for the indicator (J) to go out before
continuing the ironing.
Comment: To cool down the soleplate more
quickly, iron directly onto the ironing board, in
steam position.
Maintenance
. Self-cleaning (approx. once a month):
To cut down on the formation of limescale,
Moulinex has built a self-cleaning system into
the iron, which we advise you to use at regular
intervals. Follow these steps:
Iron is cold and unplugged;
- Place the steam control (G) to
.
- Fill the tank (K) and set the temperature
adjustment control (H) to MAX.
4
5
6
7
Odyssey.Eu11 1/12/00, 13:4416
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex Odyssey 4000 A DZ4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Odyssey 4000 A DZ4 in the language / languages: Dutch as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info