WARRANTY
• This product has been designed for
domestic use only. Any professional use,
innapropriate use or failure to comply with
the instructions, the manufacturer accepts
no responsibility and the guarantee will not
apply.
• Read the instructions for use carefully
before using your appliance for the first
time: any use which does not conform to
these instructions will absolve Moulinex
from any liability.
TROUBLESHOOTING
1.
IF YOUR VACUUM CLEANER DOESNOT START
• The appliance is not plugged-in, check
that the appliance is correctly plugged in.
2. IF THERE ISNO SUCTION
• An accessory or the tube is clogged.
Unclog the accessory tube or flexible hose.
• The lid was not closed properly: check that
the bag is properly installed and close the
lid again.
3. IF THE SUCTION OF YOUR VACUUM CLEANER
HASDROPPED,IT MAKESA NOISE AND
WHISTLES
• An accessory or the flexible hose is
partially clogged. Unclog the accessory
tube or flexible hose.
• The bag is full or saturated with fine dust.
Put a new bag in or empty the fabric dust
bag.
• The foam-filter is saturated. Clean the
foam-filter.
•
If the bag fill indicator is red, the filtration
system is saturated.
- The HEPA* cassette: change the Hepa*
cassette (ref. MT0001 01) and put it back in
its housing.
- The microfilter cassette*: withdraw the
microfilter from the cassette, and change it
(ref.
MT0001 01
). Wash the grey foam filter,
squeeze it out and leave it to dry for at least
12 hours. Then re-fit the cassette in its
housing.
• The electronic variable suction power
selector is in the minimum position.
Increase the power with the help of the
electronic variable suction power selector
(except if you are vacuuming delicate
fabrics).
•
If the mechanical power regulator on the
power nozzle is open, close the mechanical
power regulator.
4. IF THE BAG FILL INDICATOR REMAINSRED
• The bag is full. Put a new one.
5. IF THE FLOOR HEAD ISHARD TO MOVE
AROUND
• Open the suction regulator on the handle
or reduce power.
6. IF THE POWER CABLE DOESNOT REWIND
COMPLETELY
• The power cable is slow in reentering its
housing. Pull the cable back out and press
on the automatic cable rewind pedal.
If you have any product problems or queries,
please contact our customer Relations Team
first for expert help and advice (see the
contact details on the last page).
12
NoticeZÉLIO 7/06/07 14:43 Page 12