535319

Moulinex MO4013 ZELIO Manual

12
Zoom out
Zoom in
Previous page
1/50
Next page
F
GB
I
E
P
SA
FA
TR
CLEANING AND MAINTENANCE
1. CHANGING THE BAG
• The bag capacity indicator (5) tells you
when the bag is full or saturated.
If you notice that your vacuum cleaner is
less efficient, select the maximum power
and by lifting the floor head off the floor. If
the indicator remains red, replace the
bag.
• Open the lid (9) of your vacuum cleaner -
fig. 13.
• Withdraw the bag support (16) - fig. 14;
Unclip the bag (18) by pressing the lever -
fig. 15, and dispose of the bag in a waste
bin - fig. 16.
• Fit a fresh bag, position it using the tongue
provided and clip it onto the bag support
- fig. 17. Slide the bag support back onto
the runners - fig. 18 place the bag inside
the compartment - fig. 19.
• Make sure that the bag is in the correct
position before closing the lid (9).
2.
CLEANING THE FOAM FILTER FOR PROTECTION
OF THE MOTOR
• The motor foam-filter protection (12) must
always be in place when in use.
• Open the lid (9). The grid (13) - fig. 20
then remove the foam-filter (12) - fig. 21.
• Shake it and clean it, every ten dustbag
changes, with tepid soapy water.
• Rinse, dry and put it back in place.
• Let the foam-filter dry (12) completely
before putting back in place.
Caution : N.B. Make sure that the foam filter
is completely dry before fitting it again.
3.CHANGE THE HEPA* FILTER CASSETTE OR THE
MICROFILTER
* ON EVERY TENTH CHANGE OF
BAG
3.1- The Hepa* filter cassette
• Open the lid (9) of your vacuum cleaner -
fig. 13.
• Remove the Hepa* filter cassette (14) -
fig. 22 and dispose of the cassette in a
waste bin.
• Fit the new Hepa* filter cassette
(ref. MT0001 01) (14) in its compartment -
fig. 23.
• Check that the Hepa* filter cassette (14) is
fitted correctly before re-closing the lid (9).
3.2- The microfilter cassette*
• Open the lid (9) of your vacuum cleaner -
fig. 13.
•
Withdraw the microfilter cassette* (15) -
fig. 22.
• Separate the grey foam filter (15b) from
the microfilter (15a).
• Dispose of the microfilter (15a) in a waste
bin and replace it with a new Microfilter
(ref. MT0001 01).
• Wash the grey foam filter (15b) with warm
soapy water (mild detergent). Squeeze it
out and leave it to dry for at least 12 hours.
Caution: Make sure that the grey foam
filter is completely dry before putting it
back in place.
• Re-fit the grey foam filter (15b) to the
microfilter (15a).
• Re-fit the microfilter cassette* in its
compartment (15) - fig. 23.
• Check that the microfilter cassette* (15) is
fitted correctly before re-closing the lid (9).
4. CLEAN THE VACUUM CLEANER
• Clean the housing of the vacuum cleaner
with a soft and humid rag and let dry.
• Clean the cover with a dry rag - fig. 24.
• Do not use abrasive or aggressive
products.
11
NoticeZÉLIO 7/06/07 14:43 Page 11
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex MO4013 ZELIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex MO4013 ZELIO in the language / languages: English, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info