Manual Moulinex MO2430 (page 14 of 41) (English, German, Dutch, French)

720987

Zoom out

Zoom in

1/41

• If your vacuum cleaner is equipped with a telescopic tube* (20) : push the clamping button forward, extend

the tube to the desired length and release the button to lock the tube in place - fig. 3. Otherwise, assemble

the two tubes* (21) by turning slightly - fig. 4.

• Fit the tube extension* (22) if necessary.

• Fit the required accessory onto the end of the tube:

- For rugs and carpets: use the "all floors” nozzle (23) with the brush tucked in - fig. 5, or the turbo-brush*

(27 or 28*).

- For wood and hard floors: use the “all floors” nozzle (23) with the brush pulled out (fig. 6) or, for best results,

use the parquet nozzle* directly (24).

- For corners and hard to reach spots: use the crevice tool convertible into brush (26) in the flat position.

- For upholstery and delicate surfaces: use the crevice tool convertible into brush (26) or the upholstery nozzle*

(25).

Attention! Always switch off and disconnect your vacuum cleaner before changing any accessories.

Plugging and switching on the appliance

• Unwind the power cord completely, plug in your vacuum cleaner (fig. 7) and press the ON/OFF pedal (2) - fig.

• Set the suction power using the manual power switch on the handle: open the regulation vent in order to

manually decrease the suction power, for example: on fragile surfaces – fig. 9.

Storage and transport of the appliance

• After each use, switch your vacuum cleaner off by pressing on the ON/OFF pedal (2) – fig. 8- and unplug it –

fig. 10. Store the cord by pressing on the wind pedal (3) - fig.11.

• In the vertical position, place the nozzle (23) in its storage compartment on the appliance (1b) – fig. 12.

• In the horizontal position, place the nozzle (23) in its storage compartment on the appliance (1a) – fig. 13.

• You may easily transport your vacuum cleaner by the transport handle (6).

Important: Always switch off and unplug your vacuum cleaner before maintenance or cleaning.

Changing the bag

• The Bag full indicator (4) indicates that the bag is full or saturated. If you notice a reduction of the efficiency

of your appliance, set the power at maximum and hold the nozzle above the ground. If the Bag full indicator

remains red, replace the bag.

• Remove the flexible hose (19) from the suction opening (9) - fig. 2.

• Open the lid (8) of your vacuum cleaner - fig.14.

a) If your vacuum cleaner is equipped with a paper bag* :

• Remove the bag support (15) from the bag compartment (7) – fig.15a, then remove the paper bag (18a) from

its base (15) by sliding it through the runners - fig. 15b.

• Throw the bag in the rubbish bin - fig.15c.

• Place a new bag in the bag support (15) – fig. 15d, then place the base inside the compartment by sliding

it on the runners (16) – fig. 15e.

• Make sure the bag and the bag support are correctly positioned before closing the lid (8).

b) If your vacuum cleaner is equipped with a textile bag* :

• Remove the bag support (15) from the bag compartment (7) – fig.16a, then remove the textile bag (18b)

from its support (15) by sliding it through the runners - fig. 16b.

• Open the textile bag using the zipper -fig. 16c- then empty it above a rubbish bin – fig. 16d.

• Clean the bag with running water – fig. 16e.

• Leave the bag to dry for at least 24 hours (do not replace the bag until it is perfectly dry) – fig. 16f.

• Close the textile bag : make sure that the zipper is completely closed - fig. 16g - before placing it back inside

the appliance.

• Place a new textile bag in the bag support, then place the base inside the compartment by sliding it on the

runners (16) – fig. 16h.

• Make sure the textile bag and the bag support (15) are correctly positioned before closing the lid (8).

5. CLEANING AND MAINTENANCE

*Depending on model: it means special equipment for some models or optional accessories.

903397-01_MO24_city-space_903397/01 10/07/13 09:32 Page9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex MO2430 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex MO2430 Manual

Product: