659263
18
Zoom out
Zoom in
Previous page
1/118
Next page
17
EN
Do not put liquid or any ingredients in the blender bowl where the temperature exceeds 60°
C (140°F) in the blender bowl.
Put the lid (D6) on the bowl (D4), lock the cap (D7) in its housing situated on the lid.
Fit the assembled bowl (D) on the motor unit (A), with click button (D2) of the blade unit aligned
with the notch situated on the front of the motor unit (A) ( fig. 3). The bowl (D) must be pushed
down far enough on the motor unit (A) or the appliance will not work (fig. 4).
Accessories:
With the "click" button (E2) or (F2) of the blade unit (E1) or (F1) in front of you, place the
base of the bowl (E4) or (F4) under the rib (E3) or (F3) (fig. 5a) and then bring back the blade
unit (E1) or (F1) to the bowl (fig. 5b), lock by pressing the "click" button (E2) or (F2) and
then release it. . Make sure that the bowl (E4) or (F4) and the blade unit (E1) or (F1) are well
connected (fig 5c).
Check whether there is no error in the assembly of the accessories (E) and (F): the colour of the click
button (E2 or F2) must correspond to the colour of the line on the base of the bowl (E4 or F4).
Place the assembled accessory (E) or (F) on the motor unit (A). The click button (E2) or (F2)
must be in front of you. Push it until the marking is no longer visible, otherwise the appliance will
not work (fig. 6).
Blender:
Plug in the appliance and press on the button 1 (C) or 2 (B), depending on the required speed,
pressing several times for pulse operation or holding down for continuous operation. Do not run
for more than 60 seconds.
To stop the appliance, release the pressure on the button (B) or (C) unplug the appliance.
Remove the bowl (D) from the motor unit (A).
Accessories:
Plug in the appliance. Put the ingredients into the bowl (E4) or (F4).
Keep your hand supporting the bowl (E4) or (F4) and during operation press on button (B) or
(C) several times in short pulses (fig 7).
To stop the appliance, release button (B) or (C). Unplug the appliance.
Remove the accessory (E) or (F) from the motor unit (A), turn over the accessory on the work
surface and release the blade unit (E1) or (F1) by pressing on the "click" button (E2) or (F2).
You can then take out your preparation.
The lid (G) can be fitted on the bowl (E4) or (F4) to avoid preparations from drying out and also
allows them to be kept in the refrigerator for later use.
Blender :
The Blender (D) in yellow colour allows you to make liquid preparations in a few moments.
In order to facilitate the mixing, make sure to add the liquid properly.
USING YOUR APPLIANCE
USING THE ACCESSORIES
Ingredients Quantity (max) functioning time
Apple juice : apple + water 300 g + 100 g 10 sec speed 2
Banana juice : banana + water 300 g + 100 g 10 sec speed 2
Crushed ice 5 cubes 10 pulses speed 2
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex LM142A26 Fruit Sensation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex LM142A26 Fruit Sensation in the language / languages: All languages as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info