Manual Moulinex Lirys A DP1 (page 6 of 27) (Dutch)

4829

Zoom out

Zoom in

1/27

Using your appliance for

the first time

- Before using the kettle for the first time,

rinse out the interior of your kettle and boil

water once or twice and dispose of the

contents.

- Place the base of your kettle on a stable

surface and plug it in. Use the minimum

cable required to plug in the appliance,

preventing any trailing cable, which can be a

hazard.

- Remove the kettle from its base and fill it via

the pouring spout (E) or via the lid, opened by

pressing on the release control (D).

- Observe the Maximum (1.7 litre) and

Minimum (0.3 litre) markings, which you

will find on the water levels (H)

- Check that the lid is properly locked (C) by

pressing on the top, in order to avoid any

spillage, escaping steam or incorrect

operation.

- Place the kettle on its base (I).

- Turn it on by setting the switch (A) to «I»,

and the indicator light (B) will come on.

. Important:

- The appliance stops automatically as soon

as the water has boiled, the switch (A) returns

to position «0» and the indicator light (B)

goes out.

- You can also stop the kettle at any time

during the heating cycle by setting the switch

(A) to position «0».

- The appliance is protected by a safety device,

which regulates the heating cycle. If the

kettle is switched on with too little water or no

water at all the safety device will operate.

Limescale filter (depending on

model)

Depending on the hardness of the water in

your area, a layer of scale may form inside

your kettle. This happens, when water boils,

particles of lime scale may be found in the

water you pour out. To prevent this, we have

fitted the kettle with a special limescale filter

which, when you pour water, retains the

particles of scale.

- Avoid pouring water too rapidly, so as to

allow it to run slowly through the limescale

filter.

- To remove the limescale filter, remove the

kettle from its base and allow the appliance

to cool down. Never remove the filter when

the appliance is full of hot water. Press on

the lid release (D) to open the lid.

- Then simply pull the filter upward, pulling it

out of the spout.

- When replacing the limescale filter, make

sure it is correctly inserted and lock it by

pushing downwards.

Please note:

- The filter is suitable only for Lirys kettles.

- The absence of the filter does not stop the

kettle from working.

Cleaning

- Before cleaning the kettle, unplug it or remove

it from its base.

- Rinse the kettle in cold water to cool it down.

- To clean the external surfaces, use a damp

cloth and a non-abrasive detergent. Rinse

and dry carefully.

- Never immerse the kettle or the base in

water.

. Model with limescale filter

- Clean limescale filter regularly.

- Rinse it under running water, if necessary

using a soft non-metallic brush.

Maintenance

. Descaling

For water to reach boiling point, it is vital to

descale your kettle at regular intervals. To do

this, we recommend that you use wine vinegar.

. Pour 1/2 litre water into the kettle.

. Add 1/2 glass 8° vinegar.

. Bring to the boil and leave to take effect for

15 minutes.

. Then rinse your kettle several times with cold

water.

. Boil fresh water and dispose before reusing

the kettle.

. Model with limescale filter

This same mixture (water + vinegar) can also

be used to descale the limescale filter.

- Pour a little of the hot mixture into a

container.

- Soak the filter in the mixture for several

minutes, until the particles of scale lodged

in the pores of the filter have dissolved.

- Then rinse the filter copiously in clear water.

Note:

- Limescale is not hazardous, however it does

hamper the kettle’s performance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Lirys A DP1 in the language / languages: Dutch as an attachment in your email.

The manual is 0,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Lirys A DP1 Manual

Product: