This product has been designed for domestic use only.
Any commercial use, inappropriate use or failure to
comply with the instructions, the manufacturer refuses
any responsibility and the guarantee will not apply.
Begin by ironing fabrics that are ironed at low
temperatures first, then go on to those requiring a
higher temperature.
When ironing fabrics with mixed fibres, set the ironing
temperature for the most delicate fibre. For delicate
fabrics we recommend testing the fabric first on an
inconspicious place eg (inside the hem).
Fill the tank up to the “MAX”.
Store the iron on its heel.
Never use abrasive or aggressive products on the
soleplate.
If the soleplate temperature is too low, the iron will not
produce steam because of the anti-drip technology
which prevents droplets of water leaking from the
soleplate.
This system will help to provide:
a better ironing quality with a constant flow of steam,
lasting performance from your appliance.
Your appliance has been designed to operate using
untreated tap water. However, it is necessary to
operate the Self-Clean function regularly in order to
eliminate hard water deposits from the steam
chamber.
Heat concentrates the elements contained in water
during evaporation. The types of water listed below
contain organic waste or mineral elements that can
cause spitting, brown staining, or premature wear of
the appliance: water from clothes dryers, scented or
softened water, water from refrigerators, batteries or
air conditioners, pure distilled or demineralised water
or rain water should not be used in your iron.
12
This appliance complies with the technical rules and
standards for safety currently in force (Electromagnetic
Compatibility, Low Voltage, Environment).
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Warning ! The voltage of your electrical installation
must correspond to the one of the iron (220V-240V).
Connecting to the wrong voltage may cause
irreversible damage to the iron and will invalidate the
guarantee.
This iron must always be plugged into an earthed
socket. If using a mains extension lead, ensure that it is
correctly rated (10A), with an earth connection.
If the electrical cord becomes damaged, it must be
immediately replaced by an Approved Service Centre
to avoid any danger.
The appliance should not be used if it has fallen, if it has
obvious damage, if it leaks or if it functions incorrectly.
Never dismantle your appliance: have it inspected by
an Approved Service Centre, so as to avoid any
danger.
Never immerse your iron in water !
Do not unplug your appliance by pulling on the cord.
Always unplug your appliance: before filling or rinsing
the water tank, before cleaning it, after each use.
Never leave the appliance unattended when it is
connected to a power source and if it has not cooled
down for approximately 1 hour.
The soleplate may be very hot: never touch it and
always let it cool down before putting it away.
Your appliance gives off steam, which may cause
burns, especially when you are ironing on a corner of
your ironing board. Never direct the steam towards
people or animals.
Your iron should be used and placed on a flat, stable,
heat-resistant surface. When you put your iron onto its
iron rest, make sure that the surface on which you put
it is stable.
