12
CLEANING THE APPLIANCE
STORAGE
RECYCLING
• Always unplug the appliance before cleaning
the motor unit
(A)
.
• Do not immerse the motor unit, do not run it
under water. Wipe the motor unit down with a
damp cloth. Dry it carefully.
• The store
(D)
, the cones
(E1, E2, E3, E4, E5)
and
the storage accessory
(F)
can go in the
dishwasher basket at the top using the “ECO”
or “LIGHT SOIL” programme.
• Handle the cones with care because their
blades are extremely sharp.
• Should the plastic parts become stained with
foodstuffs such as carrots, rub them with a cloth
dipped in a little cooking oil and then clean as
usual.
• All of the cones
(E1, E2, E3, E4, E5*)
can be
stored on the appliance.
Stack the five cones
(Fig.10)
and position
them in the opening at the front of the holder
(D) (Fig.11)
. The storage accessory
(F)
clips
over the opening at the front of the holder
(D)
(Fig.11)
.
• Storing the power cord: push the cord into the
cavity provided for this purpose (CORD
STORAGE)
(Fig.12)
.
END-OF-LIFE ELECTRONIC PRODUCT
Your appliance is designed to operate for many years.
However, the day you plan to replace it, do not throw it away with normal household rubbish or in a
landfill but take it to a suitable collection point.
Environment protection first!
Your appliance contains a lot of recoverable or recyclable material.
Leave it at a local civic waste collection point so that it can be recycled.
If you have any problems or queries please call our
Helpline
:
0845 602 1454 – UK
01 677 4003 – Ireland
or consult our web site:
www.moulinex.co.uk
