535220

Moulinex FP7351 ODACIO Manual

23
Zoom out
Zoom in
Previous page
1/86
Next page
22
Starting your appliance
Electronic model:
- Pulse (intermittent operation):
turn
the knob
(a6)
to the "Pulse" position
By pressing successively for better
control of some preparations.
- Continuous operation:
turn the knob
(a6)
to the "1" position.
- Stop:
turn the knob
(a6)
to the "0"
position.
- Speed variator (a5):
select the speed
indicated or vary it during the
preparation.
Two-Speed Model:
- Pulse (intermittent operation):
turn
the knob
(a7)
to the "Pulse" position
by pressing successively for better
control of some preparations.
- Continuous operation:
turn the knob
(a7)
to the "1" or " 2 " position
depending on the preparation
- Stop:
turn the knob
(a7)
to the "0"
position.
- Using the upper drive (a2):
check that no accessories are
attached to the lower drive.
ASSEMBLING THE REMOVABLE
PARTS
- Fitting / removing the bowl
(b3)
The bowl is used with the following
accessories (depending on model):
- Cutters
(e)
, vegetable cutters
(d)
,
whisk
(f)
, emulsifier
(g)
, citrus press
(h)
, centrifugal juice extractor with
filter basket
(m10)
"Maxipress"
(l)
.
- If it is not already fitted, fit the seal
(b3-2)
onto the bottom of the
bowl.The lip of the seal must be
facing upwards.
- Fit the drive rod
(b3-1)
onto the seal
(b3-2)
.
- Lock the assembly with the nut
(b3-3)
until it locks.
- Dismantle the assembly and clean it
after each use.
- Fitting / removing the handles (b4) of
the bowl and (k4) the blender
- For easier cleaning and storage, the
handle of the bowl
(b4)
and the
blender
(k4)
can be removed.
- To fit the handle, position it opposite
The functions of your food
processor
the clips of the bowl.
- Slide the handle upwards until it
clicks into place.
- To remove the handle, press the
release knob
(b4-1)
or
(k4-1)
and
slide it downwards.
(Note: the lid of the blender must be
removed to allow the handle
(k4)
to
be taken off.
The handle (b4) must be fitted to the
bowl so that the upper drive cover (a1)
may be locked
MIXING / BLENDING / MINCING /
KNEADING
ACCESSORIES USED
(depending on model)
- Bowl assembly
(b)
, spindle
(c)
, and
cutters
(e)
:
• metal blade
(e1)
for blending and
chopping.
• plastic kneader
(e2)
for kneading or
mixing.
FITTING THE ACCESSORIES
Press the release button (a4) to open
the upper drive (a1) cover.
- Place the bowl
(b3)
on the lower drive
(a3)
.
- Place the spindle
(c)
on the bowl drive
(b3-1)
.
- Slide the metal blade
(e1)
or the
plastic kneader
(e2)
onto the spindle
(c)
, to the bottom of the bowl.
- Place the ingredients in the bowl.
- Fit the lid
(b2)
or
(d4)
onto the bowl.
- Close the upper drive cover
(a1)
.
You should hear it "click" shut.
To release the cutters
(e)
from the
spindle
(c)
:
- Place the assembly on a stable surface.
- Turn the spindle
(c)
in a clockwise
direction while holding the cutter
(e)
at
the top.
Recommended speeds
1
2
Function
Electronic
Model
Two-Speed
Model
Mixing 3-4-5 1-2
Chopping 5-Pulse 2-Pulse
Kneading 5 2
Blending 5 2
Moulf43 27/07/07 8:40 Page 23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex FP7351 ODACIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex FP7351 ODACIO in the language / languages: English, French, Italian as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info