535206

Moulinex FP658D MASTERCHEF 5000 Manual

29
Zoom out
Zoom in
Previous page
1/222
Next page
EN
8.2 Assembly of the mincer head
- Take the body (k3) by the feeder tube with the largest opening uppermost.
Next insert the screw (k5) (long axis first) into the body.
- Fit the cutter (k6) on the short shaft, ensuring the sharp edges are facing
outwards.
- Place your chosen grille (k7-1 or k7-2) on the cutter, fitting the lugs into
the corresponding notches on the head (k3).
- Tighten the nut (k8) firmly on the body (k3) in a clockwise direction,
avoiding over-tightening.
- Check the assembly. The shaft should be tight-fitting and not pivot or rotate.
If this is not the case, then repeat the preceding steps.
- Clip the food guide (k4) under the mincer head (k3).
8.3 Fitting the mincer head to the appliance
- With the appliance switched off and unplugged, join the mincer head (k),
with its feeder tube tilted to the right, to the adapter. Push the mincer head
as far as it will go onto the adapter (j).
- Bring the feeder tube back up to a vertical position until it locks in to place.
The mincer head (k) will lock automatically onto the adapter (j) as soon
as it is switched on.
- Attach the detachable tray (k2) to the chimney.
- Plug in the appliance.
• Usage and practical tips:
- Prepare all the ingredients you wish to mince. Remove all bones, cartilage
and sinews.
- Chop the meat into chunks (approximately 2 x 2 cm) and place them on the
tray (k2).
- Place a container under the mincer head fitted with the food guide (k4).
- Turn the speed selector (a3) to position 1 or 2 to start the appliance.
- Insert the meat into the feeder tube piece by piece using the pusher (k1).
- Never push food with the fingers or any other utensils.
Do not use your appliance for more than 15 minutes when mincing meat.
- Always ensure that frozen meat is completely defrosted.
9 : STORAGE OF ACCESSORIES
Your food processor is equipped with a storage box (m) which fits inside the
chopping bowl assembly (b). You can use it to store the stainless steel
chopping blade (d), the dough blade (e), 2 disks: vegetable cutting (g) or
emulsifying (f).
10 : LENGTH OF POWER CABLE
For ease of use and storage, you can reduce the length of the power cable by
29
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex FP658D MASTERCHEF 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex FP658D MASTERCHEF 5000 in the language / languages: All languages as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info