689653
13
Zoom out
Zoom in
Previous page
1/95
Next page
10
equivalent of a jug of water to rinse
the circuits.
Making coffee
(Follow figures 1 to 8)
Use only cold water and a n°4 paper
filter.
Do not exceed the maximum water
level indicated on the tank.
This coffee maker is equipped with a
drip stop so that you can serve coffee
before the cycle ends. Replace the
jug immediately in order to avoid
overflowing.
Wait a few minutes before you make
coffee a second time.
Programming
Setting the time
Plug in the coffee maker. The LCD
screen (d) will display 12.00 and
flashes for a few seconds.
Press the H Button in order to set the
hour. You may do this repeatedly,
or continually for faster hour
progression.
AM indicates morning hours and PM,
afternoon and evening hours.
Once you have set the hour, press the
MINI button for minutes and follow
the same procedure.
Once the minutes are set, wait for the
flashing to stop and the set time will
be validated. Otherwise, press the
(i) button once.
The programming will have to be
repeated in case of a blackout or if
the coffee maker is unplugged.
PLEASE NOTE :You can set or adjust
the time at any moment. Hold the
button down for a minimum of 3
seconds . Once the time flashes on
the screen, you may adjust the time
using the H and Min buttons.
Program mode functioning
In order to program your coffee
maker, press the PROG button once.
Set the hour and minutes according
to the time you wish your coffee
maker to start (please refer to
“Programming”, above).
Validate the set time by pressing the
PROG button once more.
The screen will display the set time
and the green light signal (k) will turn
on.
In order to display the current time
again, briefly press the
button.
At the set time, the red light signal
will turn on and the coffee maker will
start.
WARNING: The set program is
automatically deactivated at the
end of the coffee cycle; however,
the set time is saved. Reactivate the
set program every day by pressing
on the PROG button. In order to
set a different time, please refer to
paragraph “Using the appliance in
the Program Mode”.
It is possible at all times:
Turn your coffee maker ON or OFF by
pressing the button.
Cancel the programming by pressing
the PROG button for 3 seconds. When
you do so, the green light signal (k)
will turn off.
In order to reactivate the program on
your coffee maker, press the PROG
button once.
To change the set time, press the
PROG button for 2 seconds.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex FG380B10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex FG380B10 in the language / languages: All languages as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info