660985
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
EN
Mini chopper 150mL (depending on
model): FIG E & 7
- Fit the blades (E2) onto the drive pin of
the bowl (E1).
- Place the ingredients in the bowl (E1)
then fit the inner cover (E3) then the
cover (E4).
- Fit the motor unit (A) onto the cover
(E4).
- Plug in the motor unit (A) and press the
speed start button (B1 or B2).
- Remove the motor unit (A) then the
cover (E4) then the le inner cover (E3).
- Remove the blades (E2), holding it by
its plastic portion.
- After use, remove the ingredients.
- Do not operate this accessory when
empty or for more than 10 seconds.
Chopper 450mL (depending on
model): FIG F & 8
- Fit the blades (F2) onto the drive pin of
the bowl (F1).
- Place the ingredients in the bowl (F1)
then fit the cover (F3).
- Fit the motor unit (A) onto the cover
(F3).
- Plug in the motor unit (A) and press the
speed start button (B1 or B2).
- Remove the motor unit (A) then the
cover (F3).
- Remove the blades (F2) holding it by
its plastic portion.
- After use, remove the ingredients.
- Do not operate this accessory when
empty.
Maxi chopper 600mL (depending
on model): FIG G & 9
- Fit the blades (G2) onto the drive pin
of the bowl (G1).
- Place the ingredients in the bowl (G1)
then fit the cover (G3).
- Fit the motor unit (A) onto the cover
(G3).
- Plug in the motor unit (A) and press the
speed start button (B1 or B2).
- Remove the motor unit (A) then the
cover (G3).
- Remove the blades (G2) holding it by
its plastic portion.
- After use, remove the ingredients.
- Do not operate this accessory when
empty.
Multi-function 2L bowl (depending
on model): Fig I
Allows you to prepare up from 150 to
800g – Volume of bowl: 2 litres.
1) Mincing and chopping Fig 10:
- Place the drive pin (I2) in the centre of
the bowl (I1).
- Fit the blades (I3) onto the drive pin
(I2).
- Fit the reducer (I5) onto the cover (I4).
- Fit and lock the cover in place.
- Fit the motor unit (A) onto the reducer
(I5).
In 15 to 20 seconds, you can mince or
chop 150 to 500 g of ingredients: hard
ingredients (cheese, dry fruits), hard ve-
getables (carrots, celery, etc.), soft vege-
tables (onions, spinach, etc.), raw and
cooked meat (with bones and nerves
removed and diced into 1 cm cubes),
raw or cooked fish. Do not chop or
mince ingredients that are too hard
(ice, sugar) or which need to be finely
ground (wheat, coffee).
2) Grating and slicing Fig 11:
- Place the drive pin (I2) in the centre of
the bowl (I1).
- Fit the disc (I8) onto the drive pin (I2).
- Fit the reducer (I5) onto the cover (I4)
and lock it in place.
- Fit the motor unit (A) onto the reducer
(I5).
- Insert the ingredients into the tube and
guide them with the food stick (I7). Do
not push the ingredients with your fin-
gers or any other tool.
Multi-strand whisk (depending on
model): Fig H & 12
- Fit the multi-strand whisk (H2) onto the
reducer (H1).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex DD307141 Oveo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex DD307141 Oveo in the language / languages: All languages as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info