534995
27
Zoom out
Zoom in
Previous page
1/120
Next page
23
PROBLEMS, PROBABLE CAUSES AND CORRECTIVE ACTIONS
If you have a problem with your coffee machine, the most probable cause is that the
pod holder is clogged up: Wash it in plenty of running water or wash it in the dishwasher.
Problems Probable causes Corrective actions
The coffee does not flow.
- The water tank is empty. - Fill the water tank.
- Pump drained. - Fill the water tank, remove the filter
holder, lock the head and press the
button until the water flows.
- Appliance scaled. - Descale the appliance.(see descaling
paragraph).
- The pod holder is clogged up. - Soak the clogged pod holder for 4 hours in
a descaling solution at 80°C and then wash
it in the dishwasher.
The coffee is too short
and the operation is noisy.
- The water tank is empty. - Fill the water tank.
- The water tank is not inserted
correctly into its housing. - Push the water tank in correctly so that it
slots into the base.
- The pod holder is clogged up. - Soak the clogged pod holder for 4 hours in
a descaling solution at 80°C and then wash
it in the dishwasher.
Coffee leaks from the
percolator head.
- The head is dirty or impurities are
preventing it from closing
correctly.
- Clean the percolator head and the pod
holder with a soft cloth.
- The percolator head seal is
damaged. - Contact an approved service centre.
The pod is damaged
when the appliance is
opened.
- There is still pressure in the head
when it is opened. - Wait until the button stops flashing before
opening the head.
The preparation is pale
and there is no froth.
- The pod is not positioned correctly
in the pod holder. - Place the pod in a flat position in the
pod holder, ensure that the coffee is
evenly distributed in the sachet.
- The pod holder is clogged up. - Soak the clogged pod holder for 4 hours
in a descaling solution at 80°C and then
wash it in the dishwasher.
- The pod is not compatible with
the coffee maker. - Change the pod.
The button flashes rapidly
and does not stop.
- The coffee maker has switched to
a safety mode because of
overheating.
- Leave the appliance to cool for 6 hours.
If the problem persists, contact an
approved service centre.
The head cannot be
closed correctly.
- The pod is not placed correctly in
the pod holder. - Place the pod in a flat position in the
pod holder, and ensure that the coffee is
distributed evenly in the sachet.
- The pod is not compatible with
the coffee maker. - Change the pod.
The head cannot be
opened.
- The appliance has switched to a
safety mode because of excess
pressure.
- Do not force the locking knob. Wait for
quarter of an hour. If the problem persists,
contact an approved service centre.
- The pod is not compatible with
the coffee maker. - Only use flexible pods with a diameter of
71 mm. ESE type pods are not
compatible with the coffee maker.
Notice_NC00022762-01:Mise en page 1 21/04/11 12:09 Page23
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex CD1008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex CD1008 in the language / languages: All languages as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Moulinex CD1008

Moulinex CD1008 User Manual - English - 9 pages

Moulinex CD1008 User Manual - German - 9 pages

Moulinex CD1008 User Manual - Dutch - 9 pages

Moulinex CD1008 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info