Manual Moulinex Archipel 60 C HE5 41 (page 10 of 42) (Dutch)

4886

Zoom out

Zoom in

1/42

Moulinex service centre (see list in the ser-

vice booklet).

- For your own safety, use only the

accessories and spare parts from Moulinex

which are suitable for your appliance.

- All appliances undergo strict quality controls.

Practical use tests are conducted with

appliances selected at random, which

explains any signs of use.

- The iron is fitted with a thermal safety device

which cuts off the power if anything goes

wrong.

- Never leave the iron unsupervised when it

is plugged in.

- Unplug the iron :

. before filling the tank

. when you have finished ironing and for any

maintenance.

- Do not unplug the appliance by pulling on

the power cord.

- Allow the iron to cool down before putting it

away.

Using your appliance for

the first time

1. Filling the tank (iron unplugged)

- Make sure the control button (C) is in the

“

” position.

- Pull up button (B) to open the fill opening

(A).

- Fill the tank (F) (iron flat), without exceeding

the maximum level.

- Press button (B) to re-close the fill

opening (A).

2. Getting started

The control button (C) must be in the “

”

position.

- Plug in the iron.

- Adjust the temperature using the thermos-

tat button (D).

The temperature control indicator light (E) will

go out once the selected temperature is

reached.

Note:

On first use, there may be a small amount of

smoke given off; this is temporary and does

not mean there is anything wrong with the iron.

3. Steam ironing

Depending on model :

. Fixed flow of steam: turn the control button

”.

. Variable flow of steam: turn the control

button (C) to the desired steam zone.

Notes :

- Steam ironing is only possible in the steam

zone indicated on the thermostat control

button (D).

- Before starting to iron, wait for the

temperature control indicator light (E) to go

out.

4. Dry ironing

- Turn the control button (C) to the position

“

”.

5. Spray

- Press the spray button (B) in pulses.

6. Pressing (depending on model)

- To obtain an extra jet of steam, press the

control button (C) for a maximum of 5 se-

conds.

Note :

- Always use this function in the steam zone

indicated on the thermostat control button

(D).

7. Anticalc System (Anti-scale system)

(depending on model)

This fixed system, which is located inside the

tank, reduces the problems connected with

limescale build-up.

Maintenance

. Auto-cleaning (about once every 3

months)

In order to reduce scaling, Moulinex has built

an auto-cleaning system into the iron.

- The iron must be cold and unplugged.

- Set the control button (C) to the “

” posi-

tion.

- Fill the tank (F) up to maximum level and set

the thermostat control button (D) to MAX.

- Plug in the iron.

As soon as the temperature control indicator

light (E) goes out, unplug the iron and hold it

over the sink.

- Turn the control button (C) to position «A»

(auto-cleaning).

- Hold the iron over the sink for 15 seconds.

The mixture of water/steam will take with it

any residues of scale contained in the

soleplate.

- Re-set the control button (C) to the “

” po-

sition.

- Using slow, deliberate movements, tilt the

iron from left to right in order to rinse the

soleplate thoroughly and to get rid of the

remaining water.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Archipel 60 C HE5 41 in the language / languages: Dutch as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Archipel 60 C HE5 41 Manual

Product: