535890
12
Zoom out
Zoom in
Previous page
1/18
Next page
29
GB
2nd step: Crispy cooking
As the Crousty dish has a non-stick coating, it does not need to be
oiled before placing food on it.
Always use oven gloves to handle the Crousty dish, it can be very
hot.
Open the oven door and place the food in the Crousty dish.
Select “Crousty” mode by pressing
the “SELECT” button 4 times.
• The “Crousty” symbol will appear on the display,
together with “ :0”.
Setting the cooking time
Select the cooking time, using the rotary knob.
The maximum timer setting in “Crousty” mode is 60 minutes.
Setting the power
By default, the oven runs at maximum power. If you wish to use maximum
power, there is no need to make a power setting.
If, on the other hand, you wish to use a reduced power setting, select it by
pressing the “W” button the required number of times.
600W 450W 300W
In “Crousty” mode, the maximum permitted power is 600 W.
Press the “START” button to start cooking.
The grill element may well turn on and off during cooking. This is
quite normal and prevents overheating.
The Crousty dish must not be put through the dishwasher. Wash it in
warm water with washing-up liquid. Do not use abrasive cleaners.
DUO
Reheating on two levels
For use only with the DUO rack
(see details of accessories, p. 20)
This function can be used to heat two plates at the same time (using
microwave mode).
2 programmes are available, according to the desired result :
1. Hot 2. Very hot
There is no need to enter the type of food or its weight.
The automatic time calculation is based on 2 plates of about 300 g.
Check that the grill element is in the horizontal position (hinged up
against the roof of the oven) before using the “DUO” mode.
Use
Place the first plate in the centre of the turntable. Place the DUO rack over
this plate and place the second plate on the rack.
Select the programme number by pressing the DUO button once or twice,
depending on the degree of heating required.
The number of the programme will be shown
on the display, together with the “DUO” symbol.
If you do nothing for 3 seconds, the “START” symbol on the display will
blink to indicate that the oven is waiting for you to start heating.
Press the “START” button.
• The oven will start and run for exactly the time required to warm/heat
your two plates.
At the end of cooking, the oven will beep 4 times and “ : 0” will blink
4 times on the display. The clock time will then reappear on the display.
If you do not open the oven at the end of cooking, it will sound a
reminder every minute.
Using the DUO function
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moulinex 5133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex 5133 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info