504388
41
Zoom out
Zoom in
Previous page
1/63
Next page
39
English
PROGRAMMING
FEATURES
• Short press the PTT button to enter
Frequency Mode. Radio will signal current
value ‘0’ (orange blink)
• Press the SB1 button once to increase first
digit to ‘1’.
• Short press the PTT button once to move
ahead and program the frequency’s second
digit. Radio will signal current value which is ‘2’
(two red blinks).
• Press the SB1 button to increase the digit
value to ‘3’.
• Long press the PTT button. LED indicator will
show a green heartbeat to indicate 'Idle' state.
• Long press the PTT button to exit
Programming Mode or turn radio OFF.
Example of Programming a Code
Assuming current code value is set to factory
default ‘001’, and you want to change it to
CTCSS/DPL Code = 103 follow the sequence
below:
• Enter Programming Mode
• Short press the PTT button three times (Enter
CTCSS/DPL Programming Selection Mode).
Radio LED will blink orange to indicate that
current value is ‘0’ • Press the SB1 button once
(to change first digit to ‘1’) LED indicator will
blink red. Short press the PTT button (to move
forward and program second digit). Radio LED
will blink orange to indicate current value is ‘0’.
• Short press the PTT button and move ahead
to program the third digit. LED indicator will
blink red to indicate current value is ‘1’.
• Press the SB1 button to change the ‘third
digit’ to ‘2’. Press the SB1 button to change
again this ‘third digit’ to ‘3’. Radio will signal the
chosen value.
• Long press the PTT button to save changes
and return to 'Idle' Programming Mode.
• Once in 'Idle' Programming Mode, LED
indicator will start blinking a green heartbeat.
• Long press the PTT button to exit
Programming Mode.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola XTNi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola XTNi in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola XTNi

Motorola XTNi User Manual - German - 63 pages

Motorola XTNi User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info