504388
36
Zoom out
Zoom in
Previous page
1/63
Next page
34
English
PROGRAMMING
FEATURES
English
Entering Programming Mode
Note: Before programming the features, make
sure your radio is set to the channel you
wish to program. You can do so before
entering Programming Mode or at any time
during the Programming Mode by turning the
Channel Selector Knob to the desired
channel.
To read or modify frequencies, codes and
auto-scan, set the radio to 'Programming
Mode' by long pressing both the PTT and the
SB1 button simultaneously while turning ON
the radio for 3 to 5 seconds until a ‘chirp’
sounds to indicate that you have entered 'Idle'
Programming Mode (*).The radio LED will start
blinking a green heartbeat.
Note: (*)'Idle' Programming Mode is the stage of
the Programming Mode in which the radio is
waiting for the user to start the radio
programming cycle (refer to the
Programming Mode picture above).
Once you are in the 'Idle' Programming Mode,
you will be able to read the radio frequencies,
codes and auto-scan setting by short pressing
the PTT button to move along the different
programmable features.
Reading Frequencies Values
When reading frequencies values you need to
read two digits as XTNi™ series radios have
16(*) frequencies for UHF (refer to UHF
Frequencies tables).
Once in ‘Idle’ Programming Mode, the radio
will signal the first value it was programmed
when you short press the PTT button (see
picture below). This value corresponds to the
frequency's first digit value. If you short press
the PTT button again, the radio will signal you
the second digit value.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola XTNi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola XTNi in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola XTNi

Motorola XTNi User Manual - German - 63 pages

Motorola XTNi User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info