762159
13
Zoom out
Zoom in
Previous page
1/276
Next page
En
g
lish
11
GETTING STARTED
GETTING STARTED
For the following explanations, refer to “Parts Of The
Radio” on page 4 of the user guide.
TURNING RADIO ON/OFF
To turn ON the radio, rotate the ON/OFF/Volume Knob
clockwise. The radio plays one of the following:
Power up tone and channel number announcement, or
Battery level and channel number announcements, or
Silent (Audible tones disabled)
The LED blinks red briefly.
To turn the radio OFF, rotate the ON/OFF/Volume Knob
counterwise until you hear a ‘click’ and the radio LED
indicator turns OFF.
ADJUSTING VOLUME
Turn the ON/OFF/Volume Knob clockwise to increase the
volume, or counterclockwise to decrease the volume.
Note: Do not hold the radio too close to the ear when it is at a
high volume setting or when adjusting the volume setting.
READING THE DISPLAY
Note: The radio display shown here is for icon location only.
Each radio display may appear different (channel and
code) based on the pre-programmed radio defaults and
features available in the model or region. Pressing any
button, except the PTT button, will turn on the backlight.
SELECTING A CHANNEL
Use the Channel Selector Knob to access a specific
channel.
During powering on or switching channel, the voice
annunciation will confirm the channel number.
Program each channel separately. Each channel has its
own Frequency, Interference Eliminator Code and Scan
Settings.
TALKING AND MONITORING
It is important to monitor for traffic before transmitting to
avoid ‘talking over’ someone who is already transmitting.
To monitor, press and hold the SB1(*) button to access
channel traffic. If no activity is present, you will hear ‘static’.
To release, press the SB1 button again. Once channel
traffic has cleared, proceed with your call by pressing the
PTT button. When transmitting, the radio LED will be solid
red.
Note: In order to listen to all activities on a current channel,
short press the SB1 button in order to set the CTCSS/
DPL code to 0. This feature is called “CTCSS/DPL Defeat
(Squelch set to SILENT)”.
(*) This assumes SB1 button has not been programmed for a
different mode.
Hi Power
Battery
Level
Channel
Indicator
Frequency
Indicator
Interference
Eliminator Code
Indicator
Keypad
Lock
Signal
Strength
Scramble
Vox /
iVox
Repeater/Talkaround
Channel Number
Programming
Mode Indicator
Scan
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola XT460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola XT460 in the language / languages: All languages as an attachment in your email.

The manual is 8,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info