"- When the outdoor sensor is running out of battery, the icon will be flashing no matter which channel is being selected on the device. If the related channel is being selected, the Channel icon will flash at the same time.
"- When the backup battery of weather station is low, icon will be flashing.
"- The beep-beep sound will be activated in every 3 hours for any low battery notification
7. Auto Light feature
"- Press and hold
【
LIGHT
】
to turn on/ off Auto-light feature
"- Press
【
LIGHT
】
to adjust the brightness: High -> Dim -> Off
"- When the Auto-light feature is ON, the backlight will be reduced to dim in low light.
"- Press any button to activate the backlight for 8 seconds
8. Temperature & Humidity features
"- Indoor temp. range : -20C to +50C (-4F to 122F)
"- Outdoor temp. range : 0C to +50C (32F to 122F)
"- Out of range: HH.H/ LL.L
"- Indoor/ Outdoor humidity: 20% to 95% (out of range: HH/LL)
9. RF feature
"- Press and hold
【
CH
】
to reset all channels
1Press or hold
【CH】for 2 sec.
RF will start to
scan channels
for 3 mins.
2
Once the weather
station has
connected all 3
channels
It will stop to
scan
3Press 【CH】
to review the
Channel cycle :
CH1-->CH2----
>CH3--->
4Lost signal
it will start to
scan the
original channel
in 1 hour
User Manual WR990 (wireless sensor)
The weather station will accommodate up to three wireless sensors.
(Additional sensors would be sold seperately.)
To connect wireless sensor to the weather station:
1. Remove the battery cover from wireless sensor
(Leave battery cover off until the wireless sensor received by the weather station).
2.Select the wireless sensor to Channel 1,2 or 3 and insert 2 x AAA batteries.
3.Press and hold CH button for 3 seconds on the weather station until a beep sounds.
4.Press the TX button on wireless sensor to transmit RF signal.
5.When RF connection is established, the respective temperature & humidity for each of the selected channels numbers will appear on the main unit.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Motorola WR990 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Motorola WR990 in the language / languages: English as an attachment in your email.
The manual is 0.17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
