609830
23
Zoom out
Zoom in
Previous page
1/44
Next page
Setting Up an Invisible Boundary Zone 23
ENGLISH
5.
Setting Up an Invisible Boundary Zone
5.1 What You’ll Need:
1. Pet Collar Unit
2. Test Li g h t
3. Wireless Fence Unit (see “Turn Fencing Mode On or Off” on page 21).
4. Training Flags
5.2 Set Transmission Range on your Wireless Fence Unit
1. Make sure that both the Pet Collar Unit and Wireless Fence Unit are
powered on (see “Powering On/Off the Pet Collar Unit” on page 20 and
“Powering On/Off the Wireless Fence Unit” on page 21).
2. Hold the Pet Collar Unit on your hand (avoid touching the collar contacts)
and walk to your desired boundary zone.
3. Press and hold down PAIR KEY and POWER KEY on the Pet
Collar Unit at the same time until you hear a long confirmation beep.
This indicates that the transmission range is set.
If you hear 10 short beeps, it means that the transmission range has not
been set successfully. Please repeat the above steps to set transmission
range. Note that the maximum transmission distance is 150 feet line of
sight.
5.3 Set Static Correction Level to Level 2 or 3
Press or to select Static Correction Level (2 to 3).
5.4 Confirm Boundary Zone
Boundary zone is an area 2 to 3 feet before the “real” boundary. When your dog
reaches the boundary zone, the Pet Collar Unit that is worn on your dog emits a
warning beep followed by static correction to get its attention until it backs away
and goes back into the boundary. The maximum distance between the
boundary zone and the wireless fence unit is 150 feet.
1. Press and hold POWER KEY on the Pet Collar Unit to power it on.
2. Place the Test Light Contacts over the Collar Contacts on the Pet Collar
Unit.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola WIRELESSFENCE 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola WIRELESSFENCE 25 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info