575167
9
Zoom out
Zoom in
Previous page
1/14
Next page
7
English
Set Group Code
1. or to choose the Group Code.
2. SEL/ to complete Group Code setting.
3. The radio enters “Ring Tone Setting Menu”
4. MENU/GRP to back to Group Menu.
Set Ring Tone
The user can select the Ring Tone for a Direct Call. Ring Tones
are the same as Call Tones.
1. or to select a Ring Tone.
2. The selected Ring Tone sounds.
Set ID
Each radio in the group needs to be set with an ID. The user
can set an ID name of up to four (4) characters.
1. or to select an ID number.
2. If the ID is already taken, USED is seen. If USED is not
shown, then the ID is available.
3. SEL/ to advance to setting ID Name.
Set ID Name
The ID Name appears on the other radio’s display when you
make an All Call or a Direct Call. The ID Name will also on the
other radio’s display when they are placing a Direct Call. When
no ID name is set, the unit number appears.
1. or to select a character that will blink on the display.
2. SEL/ to select and move to the next character.
3. SEL/ to register the ID number and ID Name.
Note: The radio cancels selected ID Number and entered ID
Name, then exits from Group Menu when MENU/GRP
button is pressed.
Channel Setting in Group Mode
To set Auto Channel Change in Group Mode:
1. MENU/GRP to enter Group Mode.
2. SEL/ to enter Channel Setting.
3. or to “Auto Channel Change Setting”.
4. SEL/ to select.
A channel number will blink and “ALL” is seen.
5. or to select the channel.
6. SEL/ or to transmit Auto Channel Change command.
7. MENU/GRP to return to Channel Setting in Group Mode.
To set Manual Channel in Group Mode:
1. MENU/GRP to enter Group Mode.
2. SEL/ to enter Channel Setting.
3. or to “Manual Channel Setting”.
4. SEL/ to select.
A channel number will blink and “MY” is seen.
5. or to select the channel manually.
6. SEL/ to exit from Manual Channel setting.
7. MENU/GRP to return to Channel Setting in Group Mode.
Set All Call
1. MENU/GRP to enter Group Mode.
2. to enter All/ Direct Call Setting.
3. or to select All Call Transmission. “SYNC” is seen.
4. SEL/ or to exit this setting, and transmit All Call.
All Call Tone sounds. and blinks while transmitting.
5. MENU/GRP to exit.
68015000918_a_EN.fm Page 7 Thursday, October 11, 2012 3:15 PM
9


Need help? Post your question in this forum.

Forumrules
1

Forum

motorola-tlkr-t80

Reset search

  • I have the T80 Extreme - works perfectly except I cannot get the Call Tone to work. I believe it is sending out the signal as on the receiving the little indicator comes on but the is no audio. Tried this on both sets and it is the same. Pressing the PTT and voice can be heard but pressing the Call button - nothing. Have read instructions and set one of the call tones. The 'Roger' on off works ok. Now not sure what to do next ??? Submitted on 21-8-2021 at 16:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola TLKR T80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola TLKR T80 in the language / languages: English as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Motorola TLKR T80

Motorola TLKR T80 User Manual - German - 12 pages

Motorola TLKR T80 User Manual - All languages - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info